31P~60P(P10)-GB
Setting the Password
You can set the password for the Parental (rating level) setting.
Press Cursor
3
move to 'PASSWORD'
and then press ENTER
button.
•
Note
The password is set to "7890" by default.
If you have forgotten the rating level password, do the following:
•
While "NO DISC" message appears on the display of main unit
seconds. "INITIALIZE" appears on the display and all settings will return to the default values.
•
Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Downloaded From TheatreSystem-Manual.com Manuals
2/1/05 10:45 AM
Page 37
1
button to
4
Press MENU button.
Press ENTER
button.
, hold the main unit's
Press Cursor
2
button to move to
'Setup' and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
•
Enter the old password, a new
password, and confirm new password.
•
The setting is complete.
button for longer than 5
36
GB