Rotary Switch Positions; Hold Button - Amprobe AM-420 User Manual

Rotary Switch Positions

Switch Position Measurement Unit Measurement Function
250
{
200
250
200
|
20
2
200m
20m
[
2m
200μ
2M
200k
e
20k
2k
200
9V
1.5V
G

HOLD Button

Press HOLD button to freeze present reading on display. Press again to resume
normal operation.
X�
Warning
To avoid electric shock, do not use the HOLD mode to determine if a circuit is
live. The Meter holds the reading on the display and does not refresh the reading
automatically.
The "HOLD" button may be activated even when the product is NOT on (if "H"
appears in the left-side of the display, HOLD is active). The HOLD function allows
the meter to continue displaying the last reading, which may be "0". This reading
will not change as long as the HOLD function is active, even if the meter is later
connected to an energized circuit. "HOLD" can be disabled by pressing the
"HOLD" button again. Readings will resume.
V AC AC voltage measurement up to 250 V.
V AC AC voltage measurement up to 200 V.
V AC DC voltage measurement up to 250 V.
V DC DC voltage measurement up to 200 V.
V DC DC voltage measurement up to 200 V.
V DC DC voltage measurement up to 2 V.
mA DC DC current measurement up to 200 mA.
mA DC DC current measurement up to 20 mA.
mA DC DC current measurement up to 2 mA.
μA DC DC current measurement up to 200 μA.
MΩ Resistance measurement up to 2 MΩ.
kΩ Resistance measurement up to 200 kΩ.
kΩ Resistance measurement up to 20 kΩ.
kΩ Resistance measurement up to 2 kΩ.
Resistance measurement up to 200 Ω.
Ω
For measurement of dry batteries of not
V DC
exceeding 15 Vdc.
For measurement of dry batteries of not
V DC
exceeding 2 Vdc.
V DC Voltage measurement of diode PN junction
Continuity measurement, buzzer will
Ω
sound when ≤ 10 Ω.
5