Table of Contents
Advertisement
Troubleshooting
If your tool seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local Black & Decker repair agent.
Warning! Before proceeding, unplug the tool.
Tool runs slowly
Check that the spool housing can rotate freely. Carefully
N
clean it if necessary.
Check that the cutting line does not protrude more than 9
N
cm from the spool housing. If it does, cut it off so that it
just reaches the line trimming blade.
Automatic line feed does not work
Keep the tabs depressed and remove the spool cover from
N
the housing.
Pull the cutting line until it protrudes 9 cm from the
N
housing. If insufficient cutting line is left on the spool,
install a new spool of cutting line as instructed above.
Align the tabs on the spool cover with the cut outs in the
N
housing.
Push the cover onto the housing until it snaps securely
N
into place.
If the cutting line protrudes beyond the trimming blade,
N
cut it off so that it just reaches the blade.
If the automatic line feed still does not work or the spool is
jammed, try the following suggestions:
Carefully clean the spool cover and housing.
N
Remove the spool and check if the lever can move freely.
N
Remove the spool and unwind the cutting line, then wind
N
it on neatly again as described above. Replace the spool
as instructed.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
N
Connect the brown lead to the live terminal in the new
N
plug.
Connect the blue lead to the neutral terminal.
N
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Voltage
V
AC
Power input
W
-1
No-load speed min
Weight
kg
GL301
GL315
GL350
230
230
230
300
320
350
10,000
10,000
10,000
2.2
2.2
2.2
9
Hide quick links:
Advertisement
Table of Contents
