Fujitsu Eternus DX80 S2 Hardware Installation page 7

Rack Mounting (3)

Push the M5 cage nut into the
2nd hole of the front rack pillar

Above the base line of the Enclosures

At the left hand side fix the slide
rail to the front pillar with

The M5 centering screws

The M5 pan head screws
Hardware Installation ETERNUS DX80 S2 and DX90 S2
Base line of the
Controller Enclosure
6 Copyright Fujitsu Technology Solutions, Release August 2011
M5 Cage nut
M5 Centering
screw (10 mm)
M5 Pan head
screw (10 mm)