Fujitsu Eternus DX80 S2 Hardware Installation page 6

Rack Mounting (2)

Attach the 2U Bracket to the right rear
rack pillar

The M5 centering screws should be
inserted in the 1st and 6th holes
above the base line of the
Enclosures

Insert the pins of the left hand
side slide rail in the 1st and
3rd hole

Start counting from the bottom
of the 2U Bracket
Hardware Installation ETERNUS DX80 S2 and DX90 S2
2U Bracket
Base line of the
Controller Enclosure
5 Copyright Fujitsu Technology Solutions, Release August 2011
M5 Centering
screws (10 mm)