Pen Components; Power Led - HP Digital Pen 250 User Manual

Pen Components

The HP Digital Pen has the following elements (which are illustrated in the following figure):
Pen cap. Acts as the on/off switch for the pen.
1.
Power and memory LEDs. Provide power and memory status information.
2.
Reset button. Resets the pen. (See "Resetting the Digital Pen" on page 37 for more information.)
3.
Cradle. Downloads handwritten documents from the pen to the computer and charges the pen.
4.
Ink cartridge removal hole. Used to change the ink cartridge of the digital pen.
5.
Protect your HP Digital Pen 250 from theft or loss by attaching your pen with the ring attachment at the
end of the pen. Use the screws at the bottom of the cradle to secure to a desk, table, or stand it in kiosk
situations.
A space for a sticker on the pen's exterior identifies the pen owner and avoids confusion in situations
where several pens are used.

Power LED

The power LED shows you the charge level of the battery. When you power on the pen (by removing the
cap), the power LED flashes rapidly and then becomes a color indicating the battery charge level:
HP Digital Pen 250
1
Icon Battery Charge Level
green over 50%
amber 30-50%
red 10-30%
flashing red under 10%: pen will shut down
2
3
4
5
Chapter 1 Introducing the Digital Pen
User's Guide 7