Configuring The Pen Software; Configuring The Pen Power-Off - HP Digital Pen 250 User Manual

The left pane of this dialog box displays information about your HP Digital Pen 250, including:
Select Pen: this drop-down box displays the unique pen ID of your pen or pens, as well as the owner
•
information.
Owner Info: displays the owner information you entered in the Password tab of this dialog box.
•
Download Date and Download Time: display the date and time when information was last
•
downloaded by your computer.
Battery: displays the current battery level.
•
Auto Power Off: displays the time delay for turning your pen off automatically. For more information
•
about this setting, see "Configuring the Pen Power-Off" on page 19.
Memory: displays the amount of memory available.
•
Firmware Version: provides the version of your pen's firmware.
•
Pen Driver Version: provides the version of the Windows driver you are running.
•

Configuring the Pen Software

Configuring the Pen Power-Off

You can configure the pen to automatically switch off when the cap has been removed and the pen has
not been used for a given time.
View the Pen Settings dialog box as indicated in "Viewing Pen Settings" on page 18.
1.
Using the Auto Power Off drop-down list, select either Disabled (to disable the Auto Power Off
2.
feature), 30 minutes, or 1 hour.
Click OK.
3.
If your pen has automatically powered off, power it on again by replacing and then removing the cap.
Note: If you are using the Auto Power Off feature, make sure that your pen is powered on before
you fill out a form. Otherwise, no data will be captured, even though the pen will continue to
write.
HP Digital Pen 250
Chapter 3 Using the Download Software
User's Guide 19