Refrigerant Charging Qty:
CN1 (Connector 1) – Compressor, Heater and Power Cord
CN2 (Connector 2) – RC/FC LED, Load component and Temperature Sensors/POT
CN3 (Connector 3) – User Interface board (Used only for Elite models)
Electrostatic Discharge Risk
Do not touch the Circuit components, because you can damage fuse/burned or weaken the
Always handle the Boards by the sides/plastic holder.
Spare parts/stock boards if outside the BOX must be kept in anti-static packaging.
Assembly &Disassembly Procedure
A) Core Board Box
1. Disconnect the Power cord from the Mains supply.
2. Remove the Mounting Screws.