Table of Contents
Advertisement
CHAPTER 2
INSTALLATION
This chapter tells you how to inspect, unpack, and install
the Model FD1l65 Flexible Disk Drive.
2.1
PRELIMINARY INSPECTION
Before unpacking the Model FDl165 Flexible Disk Drive, in-
spect the shipping carton for any damage.
If there is dam-
age, notify the carrier immediately.
Do not open the carton
until
the
carrier's
representative
inspects
it.
If
the
carton is undamaged, follow the unpacking procedure.
2.2
UNPACKING/REPACKING PROCEDURE
This section describes
how to unpack and repack the disk
drive.
2.2.1
Unpacking Procedure
To unpack the disk drive,
refer to Figure 2-1 and follow
these
steps.
Save
all
shipping
materials
for
possible
future use.
a.
Remove
the
tape
band
from
around
the
shipping
package.
b.
Slide the styrofoam case out of the cardboard sur-
round.
c.
Open the styrofoam case.
d.
Remove the plastic film cover from the disk drive.
e.
Inspect the disk drive for any shipment damage.
2.2.2
Repacking Procedure
To repackage a disk drive for reshipment, reverse the pro-
cedure in Section 2.2.1.
2-1
Advertisement
Table of Contents
