3.1.10 Removing the gear bracket unit
(See Fig.18)
• Prior to performing the following procedure, remove the front
panel assembly, heat sink, top chassis assembly and main
board.
(1) From the top side of the bottom chassis assembly, remove
the screw V attaching the FPC guide.
(2) Remove the five screws W attaching the gear bracket unit
to the bottom chassis.
Reference:
When attaching the screws V and W, apply a locking
agent them.
(3) Take out the gear bracket unit from the bottom chassis.
Bottom chassis
W
FPC guide
Fig.18
Gear bracket unit
V
W
(No.MA161)1-15