cmd + shift click to change copy
USING tHE WatEr KEttlE
Before first use, fill the Water Kettle to the maximum level, then boil and discard the water.
The temperature can be displayed in Celsius degrees (°C) or Fahrenheit degrees (°F). To
change setting, hold the "-" and "+" buttons down at the same time.
NOtE: The Water Kettle is designed for water only. Do not put any other liquids
or substances in the Water Kettle.
Filling the Water Kettle
Open the lid of the Water Kettle
by pressing the Lid Release Button.
NOtE: There must be a minimum of 0.25 L of water for the Kettle to operate. Do not
exceed the "Max" fill line.
Push the lid down so it locks into the
closed position. You will hear a clicking
sound which indicates the lid is locked.
Fill Water Kettle. The water level is
displayed in 0.25 L increments. If there
is no water in the kettle, the water drop
icon will display and the alert tone will
sound for 6 seconds. Remove water if it
exceeds the "Max" line.
Place the Water Kettle on the base.
9/10/13 8:57 AM