Configuring Paging Groups - Cisco SPA 525G2 Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Under Supplementary Services, in the Auto Answer Page field, choose yes.
Click Submit All Changes. The phone reboots.

Configuring Paging Groups

You can configure a phone as part of a paging group. Users can then direct pages
to specific groups of phones.
Limitations:
• A phone can be a listening member of no more than two paging groups.
• No more than five paging groups can be configured on a phone.
To configure a phone as part of a paging group:
Log in to the configuration utility for the phone.
Click Admin Login and advanced.
Click the Phone tab.
Under Multiple Paging Group Parameters, enter the paging commands into the
Group Paging Script field. The syntax is as follows:
pggrp=ip-address:port;[name=xxx;]num=xxx;[listen={yes|no}]];
Where:
• IP address: Multicast IP address of the phone that will listen for and receive
pages.
• port: Port on which to page; you must use different ports for each paging
group. All phones in the same paging group must use the same port
number.
• name (optional): The name of the paging group.
• num: The number users will dial to access the paging group; must be unique
to the group.
• listen: If the phone being configured is a listening member of the page
group. A phone can be a listening member of a maximum of two groups. If
no value is entered, the default is to not listen as a member of this group.
3
50