Configuring A Line - Cisco SPA 525G2 Administration Manual

Configuring Lines and Extensions
Configuring Lines
NOTE
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
The Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones support the
"private hold" feature for MetaSwitch and BroadSoft. Users who have a shared line
can press the "PrivHold" softkey, and the call can only be resumed by the user who
placed the call on hold.
Each station with an SLA can be configured independently. Although the account
information is usually the same for all of the stations, settings such as the dial plan
or the preferred codec can vary.

Configuring a Line

This section does not apply to the WIP310.
To configure a phone line:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Under each line key for the phone, configure the following:
• Extension—Assign an extension to the line key. Defaults to 1. Generally you
should reserve EXT 1 on the client station as the primary and private
extension of the designated user. Configure shared extensions on EXTs 2
through 6 (depending on phone model).
• Short Name —Enter a
key.
Share Call Appearance
•
incoming call appearances with other phones. See
Appearance, page 25
not shared with any other phone. Defaults to private.
• Extended Function—See
Dial Functions to Unused Lines on a Cisco SPA 500 Series IP Phone, page 26
The number of line keys displayed depends on the type of phone.
NOTE
Click Submit All Changes.
short name or number to display on the LCD for the line
—Select shared if you want the line key to share
.
If you select private, the call appearance is private and
Assigning Busy Lamp Field, Call Pickup, and Speed
2
Configuring Shared Line
.
24