Audio Volume; Screen (Cisco Spa 525G/525G2) - Cisco SPA 525G2 Administration Manual

Hide thumbs Also See for SPA 525G2:
Table of Contents

Advertisement

Cisco SPA IP Phone Field Reference
User Tab
NOTE
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
For configuration information, see
525G/525G2 IP Phone, page

Audio Volume

Does not apply to the WIP310.
Parameter
Ringer Volume
Speaker Volume
Handset Volume
Headset Volume
Bluetooth Volume

Screen (Cisco SPA 525G/525G2)

Parameter
Screen Saver Enable
Configuring RSS Newsfeeds on the Cisco SPA
63.
Description
Sets the default volume for the ringer.
Sets the default volume for the full-duplex speakerphone.
Sets the default volume for the handset.
Sets the default volume for the headset.
Volume of the Bluetooth device.
NOTE
Applies to the Cisco SPA 525G/525G2 only.
Description
Enables a screen saver on the phone's LCD. When the phone
is idle for a specified time, it enters screen saver mode.
(Users can set up screen savers directly using phone Setup
button.) Any button press or on/off hook event triggers the
phone to return to its normal mode. (The screen shows
"Press any key to unlock your phone.") If a user password is
set, the user must enter it to exit screen saver mode.
B
290

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents