Roadmap To Configuration Utility Features - Cisco SPA 525G2 Administration Manual

Getting Started
Using the Web-Based Configuration Utility
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide

Roadmap to Configuration Utility Features

The following tables provide a roadmap to features available in the configuration
utility.
To perform these tasks...
View phone, extension, and line/call information,
including:
•
DHCP, current IP address, DNS addresses
•
Software and hardware versions
•
Broadcast, RTP, and SIP information
•
Registration state
•
Packets sent, received, lost, and other
information
Configure system-level parameters, including
network and debug parameters. To:
•
Enable the configuration utility and
administrator access
•
Set the Internet connection type to DHCP
•
Configure the syslog and debug servers
•
Enable VLAN and CDP
Configure parameters to adjust SIP stack and
protocols. To enable:
•
CTI
•
SIP-B
•
STUN
In the configuration utility, click
the ...
Info tab
See "Viewing Phone
Information" section on
page 19.
System tab
See Chapter 5, "Configuring
Security, Quality, and Network
Features."
SIP tab
See Chapter 4, "Configuring
SIP, SPCP, and NAT."
1
16