Cisco SPA 525G2 Administration Manual page 107

Hide thumbs Also See for SPA 525G2:
Table of Contents

Advertisement

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Parameter
Description
SIP Timer D
FRC 3261 wait time for response retransmits. Ranges from 0 to
64 seconds.
Defaults to 16 seconds.
SIP Timer J
RFC 3261 Wait time for Non-INVITE request retransmits. Ranges
from 0 to 64 seconds.
Defaults to 16 seconds.
INVITE Expires
INVITE request Expires header value. If you enter 0, the Expires
header is not included in the request. Ranges from 0 to
19999999999999999999999999999999.
Defaults to 240 seconds.
ReINVITE Expires
ReINVITE request Expires header value. If you enter 0, the Expires
header is not included in the request. Ranges from 0 to
19999999999999999999999999999999.
Defaults to 30
Reg Min Expires
Minimum registration expiration time allowed from the proxy in
the Expires header or as a Contact header parameter. If the proxy
returns a value less than this setting, the minimum value is used.
Defaults to 1 second.
Reg Max Expires
Maximum registration expiration time allowed from the proxy in
the Min-Expires header. If the value is greater than this setting, the
maximum value is used.
Defaults to 7200 seconds.
Reg Retry Intvl
Interval to wait before the Cisco IP phone retries registration after
failing during the previous registration. Do not enter 0. Defaults to
(see Note below)
30 seconds.
Reg Retry Long
When registration fails with a SIP response code that does not
Intvl
match the Retry Reg response status code (RSC) value (see next
table), the Cisco IP phone waits for this length of time before
(see Note below)
retrying.
If this interval is 0, the Cisco IP phone stops trying. This value
should be much larger than the Reg Retry Intvl value. Defaults to
1200 seconds.
4
95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents