Download Print this page

Advertisement

ADMINISTRATION
GUIDE
Cisco Small Business
IP Phones Models SPA 301, 303, 501G, 502G, 504G,
508G, 509G, 525G/525G2, and WIP310

Advertisement

   Related Manuals for Cisco SPA 301

   Summary of Contents for Cisco SPA 301

  • Page 1

    ADMINISTRATION GUIDE Cisco Small Business IP Phones Models SPA 301, 303, 501G, 502G, 504G, 508G, 509G, 525G/525G2, and WIP310...

  • Page 2

    Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks;...

  • Page 3: Table Of Contents

    Assigning Busy Lamp Field, Call Pickup, and Speed Dial Functions to Unused Lines on a Cisco SPA 500 Series IP Phone Configuring Call Pickup and Busy Lamp Field Configuring Speed Dial Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 4: Table Of Contents

    Enabling Call Transfer and Call Forwarding Services Enabling Conferencing Enabling Do Not Disturb Enabling the Missed Call Shortcut Logging Missed Calls (Cisco SPA 300 Series and Cisco SPA 500 Series) 48 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 5: Table Of Contents

    Enabling SMS Messaging Enabling the Web Server Configuring Lightweight Directory Access Protocol (LDAP) for the Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 6: Table Of Contents

    Configuring SPCP on the Cisco SPA 525G/525G2 Configuring SPCP on the Cisco SPA 300 Series and Cisco SPA 50XG Network Address Translation (NAT) and Cisco IP Phones Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 7: Table Of Contents

    Configuring the VPN on the Security Appliance Configuring the VPN on the Cisco SPA 525G/525G2 Chapter 6: Provisioning Basics Provisioning Capabilities Provisioning Configuration from Phone Keypad Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 8: Table Of Contents

    Example 1: SIT Tone Call Progress Tones Distinctive Ring Patterns Control Timer Values (sec) Configuring Supplementary Services (Star Codes) Entering Star Code Values Activating or Deactivating Supplementary Services Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 9: Table Of Contents

    Configuring the Cisco SPA 9000 for the Cisco SPA 500S Configuring the BroadSoft Server for the Cisco SPA 500S Configuring the Asterisk Server for the Cisco SPA 500S Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 10: Table Of Contents

    Internet Connection Type and Static IP Settings PPPoE Settings (Cisco SPA 525G/525G2 Only) Optional Network Configuration VLAN Settings Wi-Fi Settings (Cisco SPA 525G/525G2 Only) Bluetooth Settings (Cisco SPA 525G/525G2 Only) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 11: Table Of Contents

    Supplementary Services Ring Tone (Cisco SPA 300 Series and Cisco SPA 500 Series) Ring Tone (WIP310) Auto Input Gain (dB) Multiple Paging Group Parameters BroadSoft Settings Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 12: Table Of Contents

    Screen (Cisco SPA 525G/525G2) Attendant Console Tab (Cisco SPA 500 Series) General Unit 2 Attendant Console Status Cisco SPA 525G/525G2-Specific Tabs Wi-Fi Bluetooth Personal Address Book Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 13: Cisco Small Business Spa 300 Series, Spa 500 Series, And Wip310 Ip Phone Administration Guide

    Contents Call History Speed Dials Firmware Upgrade Appendix C: Where to Go From Here Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 14: Table Of Contents

    Viewing Phone Information, page 19 • Using IVR on the Cisco SPA 301 and Cisco SPA 501G IP Phone, page 19 Overview of the Phones The Cisco SPA IP Phone family is a line of full-featured VoIP (Voice over Internet Protocol) phones that provide voice communication over an IP network.

  • Page 15

    LCD with select button backlight WIP310 128 X 160 None color with backlight For more information on phone features, see the data sheets for each product. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 16: Cisco Spa 500s Attendant Console

    Control Protocol (SPCP). SPCP is supported only on the Cisco SPA 300 Series or Cisco SPA 500 Series IP Phones.) You can use the Cisco SPA IP Phones as part of a Cisco SPA 9000 Voice System phone network, or with any vendor’s IP PBX system that supports SIP.

  • Page 17: Cisco Spa 9000 Voice System

    Access Device Internet Figure 1 Network Configuration Example Using the Cisco SPA IP Phones as part of a Cisco SPA 9000 Voice System Network NOTE provides seamless integration of advanced features, such as paging, call pickup, and shared line appearances.

  • Page 18: Cisco Unified Communications 500 Series For Small Business

    Getting Started Network Configurations At minimum, the Cisco SPA 9000 Voice System includes a Cisco SPA 9000 IP PBX and one or more Cisco SPA IP Phones. These devices are connected through a switch to a local area network. With an Internet connection, the Cisco SPA 9000 Voice System can subscribe to ITSP services to take advantage of low calling rates.

  • Page 19: Other Sip Ip Pbx Call Control Systems

    2. Configure the wireless network (required for Cisco SPA 525G/525G2 and WIP310). 3. Install and configure the call control system, such as such as a Cisco SPA Cisco SPA 9000, Cisco Unified Communications 500 Series for Small Business, or an Internet-based IP PBX.

  • Page 20: Upgrading Firmware

    • Cisco SPA 9000 Voice System Setup Wizard—If you are using the Cisco SPA IP Phones with a Cisco SPA 9000, you can use the Cisco SPA 9000 Cisco SPA Voice System Setup Wizard to upgrade your phones. See the 9000 Voice System Setup Wizard User Guide .

  • Page 21

    WIP310 Phone Info In the Home screen, press the Options, highlight , and press the Select STEP 1 button. Software Version Scroll to STEP 2 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 22: Determining Your Ip Address

    Settings In the Home screen, press the Select key and navigate to STEP 1 Press the Select key and navigate to Phone Info. STEP 2 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 23: Downloading The Firmware

    Click Continue after reading the message regarding upgrading and your service STEP 2 provider. Enter the IP address of your phone. STEP 3 Follow the on-screen directions. STEP 4 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 24: Using The Web-based Configuration Utility

    Manager Express or Cisco Configuration Assistant for phone administration. For more information, refer to the Cisco Unified Communications 500 Office Administrator Guide Cisco Configuration Assistant Smart Business or the Communications System Administrator Guide Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 25

    Direct the browser to the IP address of the phone. To determine the IP address: STEP 2 • Cisco SPA 301: Press the asterisk (*) button four times. In the IVR menu, enter 110, then press #. The IP address is recited. •...

  • Page 26: Understanding Administrator And User Views

    These account names cannot be changed. If the service provider set an Administrator account password, you are prompted for it when you click Admin Login. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 27: Accessing Administrative Options

    Each tab contains different parameters. Some tasks require you to set parameters in different tabs. For field reference about each parameter available on the configuration utility, see Appendix B, “Cisco SPA IP Phone Field Reference.” Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 28: Roadmap To Configuration Utility Features

    Enable VLAN and CDP Configure parameters to adjust SIP stack and SIP tab protocols. To enable: Chapter 4, “Configuring • SIP, SPCP, and NAT.” • SIP-B • STUN Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 29

    Shared call (line) appearance • Enabling call conferencing, call forward, call transfer, and so on. • Select ring tones, audio input, and extension mobility settings Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 30

    (applicable only to Cisco SPA 300 Series or Cisco Chapter 9, “Configuring the SPA 500 Series IP Phones with one or two Cisco Cisco SPA 500S Attendant SPA 500S attendant consoles attached) Console.” Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 31: Viewing Phone Information

    Configuration Utility” section on page 12), you can check the current status of the Cisco SPA IP Phone by clicking the Info tab. The Info tab shows information about all phone extensions, including phone statistics and the registration status. All fields are read-only.

  • Page 32

    Recites the netmask of the phone. Recites the gateway address. Recites the MAC (hardware) address of the phone. Recites the phone software version. Recites the primary DNS server address. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 33

    To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. NOTE DHCP must be disabled to use this option; if DHCP is not disabled, you receive an error message. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 34

    Press 1 to enable or 0 to disable, then press #. To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 35: Chapter 2: Configuring Lines And Extensions

    (Cisco SPA 303 and Cisco SPA 500 series, except for the Cisco SPA 502G) or the Select button when the Resume icon is displayed (WIP310).

  • Page 36: Configuring A Line

    • Extended Function—See Assigning Busy Lamp Field, Call Pickup, and Speed Dial Functions to Unused Lines on a Cisco SPA 500 Series IP Phone, page 26 The number of line keys displayed depends on the type of phone. NOTE Click Submit All Changes.

  • Page 37: Configuring Shared Line Appearance

    Horizontal first—The same LED to flashes with the second incoming call. (Optional) Under SCA Barge-In Enable, choose yes to allow users sharing call STEP 9 appearances to take over the call on a shared line. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 38: Assigning Busy Lamp Field, Call Pickup, And Speed Dial Functions To Unused Lines On A Cisco Spa 500 Series Ip Phone

    Functions to Unused Lines on a Cisco SPA 500 Series IP Phone You can configure unused or idle lines on a Cisco SPA 300 Series or Cisco SPA 500 Series IP Phone to interact with another phone line in the system. For example, if you have two idle lines on an assistant’s phone, you can configure those lines to...

  • Page 39: Configuring Speed Dial

    Configuring Speed Dial In this example, the assistant Bob (extension 200) has another idle line (line 5) on his Cisco SPA 508G. He would like to be able to speed dial his supervisor Mark (extension 400) from that line. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 40: Cisco Spa 525g/525g2 (metaswitch)

    525G/525G2 (MetaSwitch) You can configure unused line keys for call park (for the MetaSwitch softswitch) on the Cisco SPA 525G/525G2. Users can then press this line button to park a call or retrieve a parked call. To configure: Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 41: Configuring Unused Line Keys To Access Services

    Click Submit All Changes. STEP 7 Configuring Unused Line Keys to Access Services On the Cisco SPA 300 Series or Cisco SPA 500 Series IP Phones, unused or idle phone lines can also be configured to access services, such as the following: •...

  • Page 42

    Click Submit All Changes. After the phone reboots, configured lines glow orange STEP 6 and display the following icons next to the extension label: • xml: XML icon • mp3: mp3 player icon (Cisco SPA 525G/525G2) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 43: Configuring Line Key Led Patterns On The Cisco Spa 300 Series Or Cisco Spa 500 Series Ip Phone

    Local Seized LED Appears when this station seizes the call appearance to prepare for a new outbound call. Defaults to blank (c=r). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 44

    Defaults to blank (c=r;p=s). Remote Held LED Appears when another station places this call appearance on hold. (applicable only to shared call Defaults to blank (c=r,p=s). appearance) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 45: Configuring Extensions

    • NAT, Network, and SIP Settings—Chapter 4, “Configuring SIP, SPCP, and NAT.” • Call Feature Settings—Chapter 3, “Customizing Cisco SPA and Wireless IP Phones.” Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 46

    Information—Chapter 4, “Configuring SIP, SPCP, and NAT.” • Audio (Codec) Configuration—Chapter 5, “Configuring Security, Quality, and Network Features.” • Dial Plan—Chapter 3, “Customizing Cisco SPA and Wireless IP Phones.” Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 47: Chapter 3: Customizing Cisco Spa And Wireless Ip Phones

    Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones, page 74 • Configuring BroadSoft Settings (Cisco SPA 300 Series and Cisco SPA 500 Series), page 78 • Configuring XML Services, page 80 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 48: Configuring Phone Information And Display Settings

    URL to access the voice mail system. If using an external voice-mail service, the number must include any digits required to dial out and any required area code. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 49: Configuring Internal Voice Mail For Each Extension (when Using Cisco Spa 400 For Voice Mail)

    Under Call Feature Settings, enter the voice mail line number and phone extension STEP 4 in the Mailbox ID field. For example, 2101 indicates that the Cisco SPA 400 voice mail server is configured on the Cisco SPA 9000 Line 2, phone extension 101.

  • Page 50

    + characters before and after the text to center it. In the Logo Type field, select Text Logo. STEP 4 Click Submit All Changes. The phone reboots. STEP 5 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 51: Changing The Display Background (cisco Spa 300 Series And Cisco Spa 500 Series)

    URL, the phone downloads the picture from the link and displays it on the screen. The phone automatically retrieves the picture after the specified number of seconds. Click Submit All Changes. STEP 7 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 52: Configuring The Screen Saver

    Picture). Configuring the Screen Saver You can configure a screen saver for the Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones. (Not applicable to WIP310.) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 53

    Click Admin Login and advanced. STEP 2 Click the User tab. STEP 3 Under Screen, in the Screen Saver Enable field, choose yes. STEP 4 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 54: Configuring The Lcd Contrast

    STEP 8 Configuring the LCD Contrast You can configure the LCD contrast on the Cisco SPA 300 Series and Cisco SPA 500 Series IP Phone. (Not applicable to the WIP310.) To configure the contrast for the LCD screen on the phone: Cisco SPA 303 and Cisco SPA 50XG: Log in to the configuration utility.

  • Page 55: Configuring Back Light Settings (cisco Spa 525g/525g2)

    Click Submit All Changes. STEP 6 Configuring Linksys Key System Parameters To configure the phone as part of a Linksys Key System (for use with the Cisco SPA 9000): Log in to the configuration utility. STEP 1 Click Admin Login and advanced.

  • Page 56: Enabling Call Features

    • Multicast Address—Used by the Cisco SPA 9000 to communicate with Cisco IP phones. Defaults to 224. 1 68. 1 68. 1 68:6061. (For the Cisco SPA 501G, can be configured using the IVR. See the “Using IVR on the Cisco SPA 301 and Cisco SPA 501G IP Phone”...

  • Page 57: Enabling Automatic Call Distribution (acd) Service

    To enable call back service: Log in to the configuration utility. STEP 1 Click Admin Login and advanced. STEP 2 Click the Phone tab. STEP 3 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 58: Enabling Call Park And Call Pickup Services

    Enabling Call Park and Call Pickup Services Call park and call pickup are features available on IP phones in a Cisco SPA 9000 system. Call park allows users to put a call on a line and make it available for another user to pick up.

  • Page 59: Enabling Conferencing

    On the Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones, users can press NOTE the Ignore softkey to divert a ringing call to the forwarded destination.

  • Page 60: Enabling The Missed Call Shortcut

    Click the User tab. STEP 3 Under Supplementary Services, in the Log Missed Calls for EXT <number> field, STEP 4 choose yes. Click Submit All Changes. STEP 5 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 61: Enabling Paging (intercom)

    To configure a phone to automatically accept pages: Log in to the configuration utility. STEP 1 Click Admin Login and advanced. STEP 2 Click the User tab. STEP 3 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 62: Configuring Paging Groups

    A phone can be a listening member of a maximum of two groups. If no value is entered, the default is to not listen as a member of this group. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 63: Enabling Secure Call

    Click the Phone tab. STEP 3 Under Supplementary Services, in the Service Annc Serv field, choose yes. STEP 4 Click Submit All Changes. STEP 5 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 64: Customizing Phone Softkeys

    Customizing Cisco SPA and Wireless IP Phones Customizing Phone Softkeys Customizing Phone Softkeys This feature is unavailable on the Cisco SPA 300 Series and Cisco SPA 500 Series NOTE IP Phones using SPCP. The Cisco SPA 300 Series and Cisco SPA 500 Series IP phones have four softkeys on the screen that, when pressed, perform certain actions.

  • Page 65

    Initiates a conference call. Connected, Start- Requires that Conf Serv is Conf enabled and there are two or more calls that are active or on hold. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 66

    Hold Put a call on hold. Connected, Start- Xfer, Start-Conf, Conferencing ignore Ignore Ignores an incoming call. Ringing join Join Connects a conference call. Conferencing Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 67

    (Cisco SPA 502) unavail Unavail Denotes that a user who is logged Idle in to an ACD server has set his status as unavailable. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 68: Programmable Softkeys

    Cisco NOTE recommends a maximum of 8 characters for a Cisco SPA 30X or Cisco SPA 50X phone and 10 characters for a Cisco SPA 525G/525G2 phone. If more characters are used, the label can be truncated on the phone display.

  • Page 69: Configuration Example

    Cisco NOTE recommends a maximum of 8 characters for a Cisco SPA 30X or Cisco 50X phone and 10 characters for a Cisco SPA 525G/525G2 phone. If more characters are used, the label can be truncated on the phone display.

  • Page 70: Configuring The Message Waiting Indicator

    However, if the indicator at the top of your Cisco SPA 300 Series or Cisco SPA 500 Series IP Phone is not lighting when voice mail is left, or you are not seeing message waiting notifications on your WIP310:...

  • Page 71: Configuring Ring Tones

    Click Submit All Changes. STEP 5 Configuring Ring Tones You can define up to ten ring tones for a Cisco SPA 300 Series or Cisco SPA 500 Series IP Phone. WIP310 ring tones are not configurable from the configuration utility.

  • Page 72: Configuring On-demand Ring Tones (cisco Spa 525g/525g2)

    TFTP server when a call comes in. To configure: Log in to the configuration utility. STEP 1 Click Admin Login and advanced. STEP 2 Click the Phone tab. STEP 3 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 73: User-created Mp3 Ring Tones (cisco Spa 525g/525g2)

    Click Submit All Changes. STEP 5 User-Created MP3 Ring Tones (Cisco SPA 525G/525G2) Cisco SPA 525G/525G2 users can create up to two ring tones from an MP3 audio Cisco Small file stored on a USB memory device. For instructions, see the Business SPA 525G/525G2 User Guide (SIP) , located on Cisco.com.

  • Page 74

    STEP 1 Enter the IP address of the phone. STEP 2 Click the Delete button next to the ring tone you want to delete. STEP 3 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 75: Assigning A Ring Tone To An Extension

    Click Admin Login and advanced. STEP 2 Click the User tab. STEP 3 Under Web Information Service Settings, you can edit the following fields: STEP 4 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 76: Configuring Audio Settings

    Click Admin Login and advanced. STEP 2 Click the User tab. You can configure the following settings: STEP 3 Parameter Description Ringer Volume Sets the volume for the ringer. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 77: Configuring Audio Input Gain (cisco Spa 300 Series And Cisco Spa 500 Series)

    Try a value that is loud enough without producing echo (an issue if the input gain is too high). Click Submit All Changes. STEP 5 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 78: Enabling Wireless (cisco Spa 525g/525g2 Only)

    Enabling Bluetooth (Cisco SPA 525G/525G2) To enable Bluetooth from the configuration utility: Log in to the configuration utility. STEP 1 Click Admin Login and advanced. STEP 2 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 79: Using A Bluetooth Headset (cisco Spa 525g/525g2)

    In the Bluetooth Device List, click the name of the Bluetooth headset. STEP 5 Enter the PIN for the Bluetooth headset. STEP 6 Press Submit All Changes. STEP 7 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 80

    • Phone—Your Cisco SPA 525G2 will pair with a Bluetooth headset only. Choose this option if you will not use the Cisco SPA 525G2 with a Bluetooth- enabled mobile phone. • Both—Your Cisco SPA 525G2 will use a Bluetooth headset, or operate with...

  • Page 81: Pairing Your Cisco Spa 525g2 With A Bluetooth-enabled Mobile Phone

    Scroll to Bluetooth Configuration and press Select. STEP 4 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the STEP 5 following: Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 82: Initiating Pairing From Your Bluetooth-enabled Mobile Phone

    NOTE uses an Apple iPhone. Before starting, it’s helpful to find the MAC address of your Cisco SPA 525G2 IP phone. From your IP phone, go to the Setup menu and select Status. Select Product Information. The MAC address is displayed.

  • Page 83: Enabling Sms Messaging

    Click Admin Login and advanced. STEP 2 Click the User tab. STEP 3 Under Supplementary Services, in the Text Message field, choose yes. STEP 4 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 84: Enabling The Web Server

    The web server allows administrators and users to log in to the phone using a web-based configuration utility. Administrators and users have different privileges and see different options for the phone based on their role. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 85

    Admin Login of the configuration utility. Defaults to yes (enabled). (For the Cisco SPA 301 and Cisco SPA 501G, can be configured using the IVR. See the “Using IVR on the Cisco SPA 301 and Cisco SPA 501G IP Phone” section on page 19.)

  • Page 86: Configuring Lightweight Directory Access Protocol (ldap) For The Cisco Spa 300 Series And Cisco Spa 500 Series Ip Phones

    The LDAP Corporate Directory Search feature, when configured and enabled on a Cisco SPA 300 Series or Cisco SPA 500 Series IP Phone, allows a user to search a specified LDAP directory for a name, phone number, or both.

  • Page 87

    Customizing Cisco SPA and Wireless IP Phones Configuring Lightweight Directory Access Protocol (LDAP) for the Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones In the Optional Network Configuration section, under Domain, enter the LDAP STEP 5 domain. (Only required if using Active Directory with authentication set to MD5.) Some sites may not deploy DNS internally and instead use Active Directory 2003.

  • Page 88

    Customizing Cisco SPA and Wireless IP Phones Configuring Lightweight Directory Access Protocol (LDAP) for the Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones Parameter Description LDAP Client DN Enter the distinguished name domain components [dc] ; for example:...

  • Page 89

    Customizing Cisco SPA and Wireless IP Phones Configuring Lightweight Directory Access Protocol (LDAP) for the Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones Parameter Description LDAP Search Item 4 Additional customized search item. Can be blank if not needed.

  • Page 90: Configuring Broadsoft Directory

    The BroadSoft directory service enables users to search and view their personal, group, or enterprise contacts. This application feature uses BroadSoft's Extended Services Interface (XSI). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 91: Configuring Synchronization Of Do Not Disturb And Call Forward

    Not Disturb or Call Forwarding settings are changed on the phone, changes are also made on the server; if changes are made on the server, they are propagated to the phone. This feature is disabled by default. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 92: Configuring Xml Services

    Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones: Cisco XML Object Supported Phone CiscoIPPhoneMenu Cisco SPA 525G, Cisco SPA 50X, Cisco SPA 30X CiscoIPPhoneText CiscoIPPhoneInput CiscoIPPhoneDirectory CiscoIPPhoneIconMenu CiscoIPPhoneStatus CiscoIPPhoneExecute Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 93

    For more information on XML support, see the Cisco Small Business Support community. The URL is given in Appendix C, “Where to Go From Here.” To configure the phone to connect to an XML Directory service: Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 94: Configuring Music On Hold

    Your phone can play music on hold if it is part of a system that has a music-on-hold (MOH) server. To configure music on hold: Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 95: Configuring Extension Mobility

    STEP 4 of the MOH streaming audio server. If you enter a user ID (no server), the current or outbound proxy is contacted. Defaults to blank (no MOH). If used with a Cisco SPA 9000 Voice System, defaults to imusic .

  • Page 96: Configuring Video Surveillance On The Cisco Spa 525g/525g2

    G.711 is used for a call or when the user accesses the video monitoring page during a call. To configure the video surveillance feature, perform the steps outlined in the following sections. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 97: Configuring The User Name And Account On The Camera

    (Optional) In the Associated Caller ID field, enter the phone number of the phone STEP 9 associated with the camera. For example, if the camera is located in the lobby, you Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 98: Viewing The Video

    Scroll to the camera from which you want to view and press Monitor or Select. STEP 3 Pressing Call dials the number associated with the camera (see Entering Camera Information Into the Cisco SPA525G/525G2 Configuration Utility, page 85). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 99: Chapter 4: Configuring Sip, Spcp, And Nat

    Session management boundaries. controls the attributes of an end-to-end call. The following diagram shows a SIP request for connection to another subscriber in the network. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 100: Sip Over Tcp

    SIP. This protocol is “guaranteed delivery”, which assures that lost packets are retransmitted. TCP also guarantees that the SIP packages are received in the same order that they were sent. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 101: Sip Proxy Redundancy

    DNS server. If configured, the DNS server returns an SRV record that contains a list of SIP proxy servers for the domain, with their host names, priority, listening ports, and so on. The Cisco IP phone tries to contact the hosts in the order of their priority.

  • Page 102: Rfc3311 Support

    The Cisco SPA 525G supports RFC3311, the SIP UPDATE Method. Support for SIP NOTIFY XML-Service The Cisco SPA 300 Series and Cisco SPA 500 Series IP Phones support the SIP NOTIFY XML-Service event. On receipt of a SIP NOTIFY message with an XML- Service event, the IP phone challenges the NOTIFY with a 401 response if the message does not contain correct credentials.

  • Page 103

    If set to yes enables support for the BroadSoft Talk Package, which lets users answer or resume a call by clicking a button in an external application. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 104

    Specifies the lowest TCP port number that can be used for SIP sessions. Defaults to 5060. SIP TCP Port Max Specifies the highest TCP port number that can be used for SIP sessions. Defaults to 5080. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 105

    REFER to the transferee when initiating a fully-attended call transfer (where the transfer target has answered). Default value is “no,” where the call leg is not held. NOTE Not applicable to WIP310. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 106: Configuring Sip Timer Values

    Defaults to 16 seconds. SIP Timer H RFC 3261 INVITE final response time-out value for ACK receipt. Ranges from 0 to 64 seconds. Defaults to 16 seconds. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 107

    If this interval is 0, the Cisco IP phone stops trying. This value should be much larger than the Reg Retry Intvl value. Defaults to 1200 seconds. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 108

    REGISTER again. If a RETRY-AFTER header is not present, the phone waits for the value specified in the Reg Retry Interval or the Reg Retry Long Interval parameter. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 109: Configuring Response Status Code Handling

    <RTP Port Min> and <RTP Port Max> should define a range that contains at least 10 even number ports (twice the number of lines); for example, 100 – 106. Defaults to 16384. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 110

    Max RTP ICMP Err—Number of successive ICMP errors allowed when transmitting RTP packets to the peer before the Cisco IP phone terminates the call. If the value is set to 0 (the default), the Cisco IP phone ignores the limit on ICMP errors, disabling the feature.

  • Page 111: Configuring Sdp Payload Types

    Under SDP Payload Types, configure the fields shown in the following table and STEP 4 click Submit All Changes. Parameter Description AVT Dynamic Payload AVT dynamic payload type. Ranges from 96-127. Defaults to 101. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 112

    RTP-Start-Loopback Codec. Select one of following: G711u, G711a, G726-16, G726-24, G726-32, G726-40, G729a, or G723. Defaults to G711u. AVT Codec Name AVT codec name used in SDP. Defaults to telephone-event. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 113

    Defaults to G723. NOTE Not applicable to the WIP310 or Cisco SPA 525G. EncapRTP Codec Name EncapRTP codec name used in SDP. Defaults to encaprtp. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 114: Configuring Sip Settings For Extensions

    Defaults to up and down. Under SIP Settings, configure the following fields: STEP 5 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 115

    Enter the appropriate header in the field provided. SIP Remote-Party-ID To use the Remote-Party-ID header instead of the From header, select yes. Otherwise, select no. Defaults to yes. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 116

    To contact the refer-to target, select yes. Otherwise, select no. Contact Default: no. Referee Bye Delay For the Referee Bye Delay, enter the appropriate period of time in seconds. Defaults to 0. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 117

    SIP responses after receiving the first 183 SIP response for an outbound INVITE. To enable this feature, select yes. Otherwise, select no. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 118: Configuring A Sip Proxy Server

    Click Admin Login and advanced. STEP 2 Click the Extension <number> tab. STEP 3 Configure the proxy and registration parameters for each extension. STEP 4 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 119

    This field is ignored if: • Use Outbound Proxy is set to no • Outbound Proxy is blank Defaults to yes. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 120

    DNS SRV record lookup on the server name. It needs to know proxy priority; otherwise, it does not retry. Defaults to 3600 seconds. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 121: Configuring Subscriber Information Parameters

    To use the authentication ID and password for SIP authentication, select yes. Otherwise, select no to use the user ID and password. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 122: Configuring Spcp On The Cisco Spa 525g/525g2

    (Optional) To configure the phone to automatically detect the protocol being used STEP 5 on the network to which it is connected, in the SPA525-auto-detect-sccp field, choose yes. Click Submit All Changes. STEP 6 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 123: Configuring Spcp On The Cisco Spa 300 Series And Cisco Spa 50xg

    Configuring SPCP on the Cisco SPA 300 Series and Cisco SPA 50XG The Cisco SPA 300 Series and Cisco SPA 50XG can be used as part of a Cisco Unified Communications System. This system uses SPCP (also called SCCP) for call control features.

  • Page 124: Nat Mapping With Session Border Controller

    NOTE Controller functionality. Click Admin Login and advanced. STEP 1 Click the SIP tab. STEP 2 Under NAT Support Parameters, configure the following: STEP 3 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 125: Configuring Nat Mapping With Stun

    Click the SIP tab. STEP 3 Under NAT Support Parameters, configure the following: STEP 4 • Handle VIA received: yes • Handle VIA rport: yes Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 126: Determining Whether The Router Uses Symmetric Or Asymmetric Nat

    This procedure assumes that a syslog server is configured and is ready to receive NOTE syslog messages. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 127

    Note that this address and port number has to be reachable from the Cisco IP phone. This port number appears on the output file name. The default port number is 514. The default output is named syslog.514.log (if port number was not specified).

  • Page 128: Chapter 5: Configuring Security, Quality, And Network Features

    The following features help ensure that calls are secure and authenticated. • SIP Initial INVITE and MWI Challenge, page 117 • SIP Over TLS, page 117 • SRTP and Securing Calls, page 118 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 129: Sip Initial Invite And Mwi Challenge

    TLS is application protocol-independent. Higher-level protocols such as SIP can layer on top of the TLS protocol transparently. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 130: Srtp And Securing Calls

    Secure Call Service activates secure encryption of RTP streams between the two endpoints. You can disable this if the other endpoint (or gateway) does not support this proprietary method. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 131: Secure Call Indication Tone

    (less than -19 dBm), so it does not interfere with the conversation. You can Regional Call Progress Tones configure it on the web page under Defaults to 397@-19,507@-19;15(0/2/0,.2/. 1 /1,. 1 /2. 1 /2) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 132: Ensuring Voice Quality

    Note that Cisco IP phones support voice codec priority. You can select up to three preferred codecs. The administrator can select the low-bit-rate codec used for each line. G.711a and G.711u are always enabled.

  • Page 133: Bandwidth Requirements

    VoIP application traffic. QoS features are available on many data networking switches and routers. A QoS-enabled router prioritizes the packets going upstream to the ISP. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 134: Factors Affecting Voice Quality

    Cisco IP phones support the most popular audio compression algorithms for IP Telephony: G.711 a-law and u-law, G.726, Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 135

    The RTP receiver in Cisco IP phones keeps a reserve of samples to absorb the network jitter, instead of playing out all the samples as soon Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 136

    RTP packet. Packets can be adjusted to contain from 1–10 audio frames. Increasing the number of frames decreases the bandwidth utilized, but it also increases delay and can affect voice quality. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 137: Configuring Voice Codecs

    STEP 2 Click the Ext <number> tab for the extension you want to configure. STEP 3 Under Audio Configuration, configure the following parameters: STEP 4 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 138

    To enable the use of the G.729a codec at 8 kbps, select yes. Otherwise, select no. Defaults to yes. G722 Enable Enables use of the G.722 codec. Defaults to yes. NOTE Not applicable to the WIP310. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 139

    To enable silence suppression so that silent audio frames are not transmitted, select yes. Otherwise, select no. See “Ensuring Voice Quality” section on page 120. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 140: Configuring Domain And Internet Settings

    SIP messages only from the entered servers. Log in to the configuration utility. STEP 1 Click Admin Login and advanced. STEP 2 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 141: Configuring Dhcp, Static Ip, And Pppoe Information

    Ethernet principles supporting multiple users in a LAN combine with the principles of PPP, which apply to serial connections. PPPoE is only applicable to the Cisco SPA525G NOTE /525G2 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 142: Setting A Static Ip Address

    Configuring Domain and Internet Settings Click Submit All Changes. STEP 5 For the Cisco SPA 301 and Cisco SPA501G, can be configured using the IVR. See NOTE “Using IVR on the Cisco SPA 301 and Cisco SPA 501G IP Phone” section on...

  • Page 143: Configuring Pppoe Settings (cisco Spa 525g/525g2 Only)

    Click Admin Login and advanced. STEP 2 Click the System tab. STEP 3 Configure the following fields: STEP 4 Parameter Description Host Name The host name of the phone. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 144

    The debug server name and port. This feature specifies the server for logging debug information. The level of detailed output depends on the debug level parameter setting. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 145: Configuring Vlan Settings

    If you use a VLAN your IP phone voice packets are tagged with the VLAN ID. (This section is not applicable to the WIP310.) If you are using a Cisco switch, Cisco discovery protocol (CDP) is enabled (this is the default). CDP is negotiation-based and determines which VLAN the IP phone resides in.

  • Page 146

    0-4095 (default 0). Value of the VLAN ID. The phone tags all the untagged frames coming from the PC (it will not tag frames with an existing tag). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 147: Configuring Ssl Vpn On The Cisco Spa 525g/525g2

    VPN. The following restrictions apply: • Only the G.711 Audio Codec is supported. • SRTP for secured audio is not supported. • Video monitoring is not supported. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 148: Configuring The Vpn On The Security Appliance

    Configuring Security, Quality, and Network Features Configuring SSL VPN on the Cisco SPA 525G/525G2 To configure and use the Cisco SPA 525G/525G2 on a VPN, you must do the following: 1. Configure the VPN on the VPN server using Cisco AnyConnect VPN client software.

  • Page 149

    Scroll to Network Configuration and press Select. STEP 2 Scroll to Web Server and ensure that it is enabled. Press the right arrow key if it is STEP 3 not enabled. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 150

    525G2 in SPCP mode.) Click the Info tab. • Use the phone menu: Press the Setup button. Scroll to Status and press Select. Scroll to VPN Status and press Select. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 151: Chapter 6: Provisioning Basics

    Cisco Small Business IP Telephony Devices Provisioning Guide • (service provider login required) • Cisco SPA 9000 Voice System Administration Guide • Service provider documentation Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 152: Provisioning Capabilities

    IP address of the provisioning server, the unit resyncs to a known path name. This feature enables service providers to allow VARs to install and provision Cisco phones. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 153

    Navigate to profile rule. Enter the profile rule in the following format: STEP 3 protocol server[:port]/profile_pathname For example, to have the WIP310 provisioning done by the Cisco SPA 9000 Voice System, enter: 192.168.2.64/cfg/generic.xml Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 154: Ip Phone Configuration Profiles

    <flat-profile> … </flat-profile>. The encapsulated elements specify values for individual parameters. The following is an example of a valid XML profile: <flat-profile> <Admin_Passwd>some secret</Admin_Passwd> <Upgrade_Enable>Yes</Upgrade_Enable> </flat-profile> Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 155: Obtaining The Spc Tool

    Click the Profile Compiler (SPC) Tool link. STEP 2 Choose the version of software that is installed on the phones. STEP 3 Follow the links to download the software. STEP 4 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 156: General Purpose Parameters

    “yes.” Cisco Small Business IP If you are a service provider with a password, see the Telephony Devices Provisioning Guide. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 157: Upgrading, Resyncing, And Rebooting Phones

    Log in to the configuration utility. STEP 1 Click the Provisioning tab. STEP 2 Under Firmware Upgrade, in the Upgrade Enable field, choose yes. STEP 3 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 158: Firmware Upgrade Parameters

    The device does not complete a firmware upgrade operation unless the firmware version is greater than or equal to this parameter. The default is (empty). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 159: Resyncing A Phone

    HTTPS server: http://phone-ip-addr/admin/resync?protocol://server- name[:port]/profile-pathname • Parameter following resync? defaults to the Profile Rule setting on the web server Provisioning page. • Protocol defaults to TFTP. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 160: Rebooting A Phone

    (FQDN). The use of a FQDN facilitates the deployment of redundant provisioning servers. When the provisioning server is identified through a FQDN, the Cisco IP phone attempts to resolve the FQDN to an IP address through DNS. Only DNS A-records are supported for provisioning; DNS SRV address resolution is not available for provisioning.

  • Page 161: Automatic In-house Preprovisioning

    Subsequently, the customer binds the particular device to the assigned service account. To do so, the unprovisioned Cisco IP phone is instructed to resync with a specific provisioning server through a resync URL command. The URL command typically includes an account PIN number or alphanumeric code to associate the device with the new account.

  • Page 162: Configuration Access Control

    HTTPS requests from the Cisco IP phone to the provisioning server, using both server and client certificates for authenticating the client to the server and the server to the client. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 163: Server Certificates

    Cisco IP phone. Client Certificates In addition to a direct attack on the Cisco IP phone, an attacker might attempt to contact a provisioning server using a standard web browser, or other HTTPS client, to obtain the Cisco IP phone configuration profile from the provisioning server.

  • Page 164: Obtaining A Server Certificate

    Generate a private key that will be used in a CSR (Certificate Signing Request). STEP 2 This key is private and you do not need to provide this key to Cisco support. Use open source "openssl" to generate the key. For example: openssl genrsa -out <file.key>...

  • Page 165: Chapter 7: Configuring Regional Parameters And Supplementary Services

    The call progress tone pass-through feature lets you hear call progress tones (such as ringing) that are generated from the far-end network. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 166: Advanced Scripting For Cadences, Call Progress Tones, And Ring Tones

    FreqScript;Z1[;Z2]. The section Zi is similar to the Si section in a CadScript except that each on/off segment is followed by a frequency components parameter: Zi = Di(oni,1/offi,1/fi,1[,oni,2/offi,2/fi,2 [,oni,3/offi,3/fi,3 [,oni,4/ offi,4/fi,4 [,oni,5/offi,5/fi,5 [,oni,6/offi,6/fi,6]]]]]) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 167: Example 1: Dial Tone

    Segment 2: On=0.38s, Off=0s, with Frequency 2 Segment 3: On=0.38s, Off=0s, with Frequency 3 Segment 4: On=0s, Off=4s, with no frequency components Total Tone Length = 20s Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 168: Example 1: Sit Tone

    Example 1: SIT Tone n=Classic-1,w=3;c=1 n=Simple-1,w=2;c=1 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 169: Call Progress Tones

    Number of Cadence Sections = 1 • Cadence Section 1: Section Length = 60s • Number of Segments = 4 • Segment 1: On=0.2s, Off=0.2s Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 170: Control Timer Values (sec)

    (PDD), which is the time between the start of a call and the time the phone starts ringing. A value that is too low can result in dialed digits not being correctly recognized. Defaults to 10. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 171: Configuring Supplementary Services (star Codes)

    Entering Star Code Values The phone provides default values for star codes. You can change the default star code values for your area or region. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 172

    Call Forward No Answer Act (*92)—Call forwards if no answer. Applies to primary extension only. • Call Forward No Answer Deact (*93)—Cancels call forward no answer. Applies to primary extension only. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 173

    (on this call appearance only). • Secure One Call Deact (*19)—Prefers to use unencrypted media for the outbound call (on this call appearance only). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 174

    * code. For example: a. After the user dials *98, the Cisco IP phone plays a special prompt tone while waiting for the user the enter a target number (which is validated according to the dial plan as in normal dialing).

  • Page 175

    * code. For example: a. After the user dials *72, the Cisco IP phone plays a special prompt tone while waiting for the user the enter a target number (which is validated according to the dial plan as in normal dialing).

  • Page 176: Activating Or Deactivating Supplementary Services

    FAF: Call forward all service disabled; FBT: Call forward busy service enabled; FBF: Call forward busy service disabled; FNT: Call forward no answer enabled; FNF: Call forward no answer disabled; Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 177: Bonus Services Announcement Description

    4) Block Last Call BLT: Block last call enabled BLF: Block last call disabled 5) Accept Last Call ALT: Accept last call enabled ALF: Accept last call disabled Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 178: Outbound Call Codec Selection Codes

    If the specified codec is unavailable, the preferred codecs are used in order, if specified (see the “Configuring Voice Codecs” section on page 125). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 179: Miscellaneous Parameters

    To help false detection, avoid inband and use OOB. With OOB, the DTMF Playback Length does not matter. If you use inband, use a smaller DTMF Boost value. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 180: Localizing Your Ip Phone

    (which is also played by the Cisco SPA 525G2). This does not affect operation with interactive voice response applications, as the tone is audible only on the local device. See the Cisco support community at http://www.cisco.com/go/smallbizsupport...

  • Page 181: Managing The Time And Date

    NTP time or SIP Message Date whenever they are available to the phone. Manual setup requires you to enter the time in 24- hour format only. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 182: Configuring Daylight Savings Time

    (0-59). Optional values inside brackets [ ] are assumed to be 0 if not specified. Midnight is represented by 0:0:0 of the given date. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 183: Daylight Saving Time Examples

    Use the Language Selection parameter to select the phone’s default display language. The value must match one of the languages supported by the dictionary server. The script (dx value) is as follows: • <Language_Selection ua="na"> Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 184: Creating A Dictionary Server Script

    Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 185

    Configuring Regional Parameters and Supplementary Services Localizing Your IP Phone For example: Dictionary_Server_Script ua="na" serv=tftp://192.168.1.119/ ;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.xml / Dictionary_Server_Script Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 186: Chapter 8: Configuring Dial Plans

    If the Cisco SPA IP Phones are part of the Cisco SPA 9000 Voice System, dial plans are configured on the Cisco SPA 9000. In installations where a Cisco SPA...

  • Page 187

    SPA 9000 Voice > SIP page, PBX Parameters section). 5. If the call routing rule allows the call to process, then the Cisco SPA 9000 compares the dialed digits to the LINE INTERFACE dial plan (on the Cisco SPA 9000 Voice >...

  • Page 188: Digit Sequences

    Enter a period for element repetition. The dial plan (period) accepts 0 or more entries of the digit. For example, allows users to enter 0, 01, 011, 0111, and so on. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 189

    This feature is typically used for implementation of a hot line and warm line, with 0 delay for the hot line and a non-zero delay for a warm line. EXAMPLE: Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 190: Digit Sequence Examples

    10-digit number that begins with a digit 2 through 9. The system automatically inserts the 1 prefix before transmitting the number to the carrier. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 191

    After the user presses 9, an external dial tone sounds. The user can enter any number that starts with 011, as in an international call from the U.S. • Informational numbers Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 192: Acceptance And Transmission Of The Dialed Digits

    The Interdigit Short Timer applies when the dialed digits match one or more candidate sequences in the dial plan. The default value is 3 seconds. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 193: Dial Plan Timer (off-hook Timer)

    • Create a hotline for all sequences on the System Dial Plan EXAMPLE: ( | (9,8<:1408>[2-9]xxxxxx | 9,8,1[2- P9<:23> 9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 194: Interdigit Long Timer (incomplete Entry Timer)

    Interdigit Long Timer expires. This setting is especially helpful to users such as sales people, who are reading the numbers from business cards and other printed materials while dialing. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 195: Interdigit Short Timer (complete Entry Timer)

    9,8,011xx. | 9,8,xx.|[1-8]xx) 9,8,1[2-9]xxxxxxxxxS0 With the timer set to 0, the call is transmitted automatically when the user dials the final digit in the sequence. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 196: Editing Dial Plans On The Ip Phone

    Maximum number length is 63 characters. Defaults to blank (no emergency number). (Not applicable to WIP310.) Click Submit All Changes. The phone reboots. STEP 8 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 197: Resetting The Control Timers

    Enter the desired values in the Interdigit Long Timer field and the Interdigit Short STEP 5 Timer field. Refer to the definitions at the beginning of this section. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 198: Chapter 9: Configuring The Cisco Spa 500s Attendant Console

    The Cisco SPA 500S is a 32-button attendant console for the Cisco SPA 500 Series IP Phones. The Cisco SPA 500S works in both SIP and SPCP mode. The Cisco SPA 500S connects to the phone with the attachment arm provided (not shown).

  • Page 199: Cisco Spa 500s Features

    Connects to a second Cisco SPA 500S unit (optional) Solid Green Idle Solid Red In-use Blinking Red Ringing Orange Solid: not registered. Blinking: configuration error. Not configured Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 200: Setting Up The Cisco Spa 500s Attendant Console

    STEP 1 the phone. For instructions on installing the Cisco SPA 500S and an introduction to its use, refer to the Cisco SPA 500S Quick Start Guide or the phone user guides available on Cisco.com. See Appendix C, “Where to Go From Here,”...

  • Page 201: Configuring The Cisco Spa 9000 For The Cisco Spa 500s

    The BroadSoft server requires you to assign IP phone users to the Busy Lamp (BLF) Monitor Users List. The BroadSoft server sends updates on the status of each phone on this list to the Cisco SPA 500S, which subscribes for this service. To configure the BroadSoft server to support the Cisco SPA 500S:...

  • Page 202: Configuring The Asterisk Server For The Cisco Spa 500s

    “Configuring BroadSoft Busy Lamp Field Auto-Configuration” section on page 195. Configuring the Asterisk Server for the Cisco SPA 500S To configure the Asterisk server to allow the Cisco SPA 500S to register for BLF monitoring: Add a context in the extensions.conf file. STEP 1 Add a Subscribecontext command to point to the context in the sip.conf file.

  • Page 203: Configuring The Cisco Spa 500s

    NOTE These steps are not required for other server types such as BroadSoft and Asterisk. Connect to the configuration utility for the phone to which the Cisco SPA 500S is STEP 1 connected. Click Admin/Advanced on the configuration utility page.

  • Page 204: Unit/key Configuration Scripts

    STEP 8 default. You cannot complete the software configuration for the Cisco SPA 500S if this option is enabled. (You can use Test Mode Enable later to test the Cisco SPA 500S.) Create a configuration script for each target extension or user you want to monitor STEP 9 using the Cisco SPA 500S.

  • Page 205

    • vid (optional)— All LEDs on the Cisco SPA 500S use phone extensions that they are assigned to. By default, LEDs on the Cisco SPA 500S are assigned to the first configured extension on the connected phone. You can optionally assign LEDs to any other phone extensions using vid=keyword.

  • Page 206: Assigning Cisco Spa 500s Leds To Phone Extensions

    Setting Up the Cisco SPA 500S Attendant Console Assigning Cisco SPA 500S LEDs to Phone Extensions By default, all 32 keys on the Cisco SPA 500S are assigned to the first extension on the IP phone (extension 101 based on the default multicast autoconfiguration).

  • Page 207: Broadsoft Syntax

    To configure BLF auto-configuration: Log in to the configuration utility. STEP 1 Click Admin Login. STEP 2 Click advanced. STEP 3 Click the Att Console tab. STEP 4 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 208: Attendant Console Parameters

    Enables or disables the second Cisco SPA 500S unit (each phone can have up to two Cisco SPA 500S units attached). Subscribe Delay Length of delay before attempting to subscribe. Defaults to 1. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 209: Monitoring The Cisco Spa 500s

    To display the status of the Cisco SPA 500S, click the Attendant Console Status link on the GUI. The status of each attendant console attached (Unit 1 and Unit 2) is shown. Parameters are read-only. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 210: Cisco Spa 500s Unit Monitoring Notes

    Yes, Fail, or No. No indicates that the feature/function (fnc) of that line does not require a subscription (such as speed dial). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 211: Led Script

    This is a user-defined blinking pattern used only when p = ud. It consists of up to 4 pairs of on/off duration in seconds with up to 2 decimal places; each value is separated by a forward slash (/). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 212: Led Script Examples

    Local Ringing: This station is ringing for an incoming call on this call appearance • Local Held: This station has placed this call appearance on hold Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 213

    Disabled: This line key on this station is disabled • Call Back: A call back (repeat dialing) operation is currently active on this call appearance Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 214

    Attendant Console Status, page 294 • Cisco SPA 525G/525G2-Specific Tabs, page 295 For information about the Provisioning page, see the Cisco Small Business IP NOTE Telephony Devices Provisioning Guide. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 215: Info Tab

    Displays the default router assigned to the IP phone. Primary DNS Displays the primary DNS server assigned to the IP phone. Secondary DNS Displays the secondary DNS server assigned to the IP phone. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 216

    Shows the wireless channel being used in the wireless 525G/525G2 only) connection. Security Mode (Cisco SPA Shows if wireless security is configured on the phone 525G/525G2 only) (yes or no). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 217: Network Configuration (spcp)

    Shows if wireless security is configured on the phone (yes or no). Network Configuration (SPCP) Parameter Description TFTP Server Address of the TFTP server for provisioning. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 218: Vpn Status (spa 525g/525g2 Only)

    Serial Number Serial number of the IP phone. Software Version Version number of the IP phone software. Hardware Version Version number of the IP phone hardware. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 219: Phone Status

    Concurrent packet drops result in voice quality issues. Broadcast Bytes Dropped Total number of broadcast bytes received but not processed. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 220

    Indicates whether the link from the IP phone to a device Cisco SPA 50X) plugged into the PC port on the phone is up or down. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 221: Ext Status

    Indicates whether the far end has placed the call on hold. Callback Indicates whether the call was triggered by a call back request. Peer Name Name of the internal phone. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 222

    The mean duration, expressed in milliseconds, of the burst periods that have occurred since the beginning of reception. Defined in RFC 3611—RTP Control Protocol Extended Reports (RTCP XR). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 223: Downloaded Ring Tone

    Ring Tone 2 Information about the user downloaded ring tone 2: name, size, and time-stamp of the tone. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 224: System Tab

    Enable Web Admin Access Lets you enable or disable local access to the configuration utility. Select yes or no from the drop- down menu. Defaults to yes. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 225: Internet Connection Type And Static Ip Settings

    Internet Connection Type and Static IP Settings Parameter Description Internet Connection Type Choose the type of internet connection: • DHCP • Static IP • PPPoE (not applicable to WIP310) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 226: Pppoe Settings (cisco Spa 525g/525g2 Only)

    Point-to-Point Protocol over Ethernet (PPPoE) link. PPPoE Service Name Specifies the service name assigned by the ISP for connecting on a Point-to-Point Protocol over Ethernet (PPPoE) link. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 227: Optional Network Configuration

    Zero (0) means no debug information is generated. To log SIP messages, you must set the Debug Level to at least 2. Defaults to 0. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 228: Vlan Settings

    0-4095 (default 0). Value of the VLAN ID. The phone tags all the untagged frames coming from the PC (it will not tag frames with an existing tag). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 229: Wi-fi Settings (cisco Spa 525g/525g2 Only)

    If the phone should attempt to connect to the VPN each time it is powered on. Choose yes to have the phone try to automatically connect, or no to keep the default behavior. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 230: Sip Parameters

    Macro expansion of $A to $D corresponding to GPP_A to GPP_D allowed. SIP Server Name Server header used in responses to inbound responses. Defaults to $VERSION. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 231

    (if defined by RFC 261) if <Use Compact Header> parameter is set to yes. Default: no Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 232

    The Cisco IP phone always uses a new random Call-ID for registration after a power-cycle, regardless of this setting. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 233

    (where the transfer target has answered). Default value is "no,” where the call leg is not held. NOTE Not applicable to WIP310. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 234: Sip Timer Values (sec)

    Expires header or as a Contact header parameter. If the proxy returns a value less than this setting, the minimum value is used. Defaults to 1 second. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 235

    Sub Max Expires This value sets the upper limit of the REGISTER min- expires value returned from the Proxy server in the Min-Expires header. Defaults to 7200. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 236: Response Status Code Handling

    Defaults to blank. Retry Reg RSC Interval to wait before the IP phone retries registration after failing during the last registration. Defaults to blank. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 237: Rtp Parameters

    RTP packets to the peer before the IP phone terminates the call. If value is set to 0, the IP phone ignores the limit on ICMP errors. Defaults to 0. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 238

    RTP packet. If disabled (or before the first RTP packet arrives) sends RTP to the destination as indicated in the inbound SDP. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 239: Sdp Payload Types

    INFOREQ dynamic payload type. Defaults to blank. G726r16 Dynamic Payload G.726-16 dynamic payload type. Ranges from 96-127. Defaults to 98. NOTE Not applicable to Cisco SPA 525G/WIP310. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 240

    Defaults to telephone-event. G711u Codec Name G.711u codec name used in SDP. Defaults to PCMU. G711a Codec Name G.711a codec name used in SDP. Defaults to PCMA. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 241

    G.722 codec name used in SDP. Defaults to G722. NOTE Not supported on the WIP310. EncapRTP Codec Name EncapRTP codec name used in SDP. Defaults to encaprtp. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 242: Nat Support Parameters

    Defaults to no. STUN Enable Enables the use of STUN to discover NAT mapping. Select yes or no from the drop-down menu. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 243

    RTP port range. Defaults to blank. NAT Keep Alive Intvl Interval between NAT-mapping keep alive messages. Defaults to 15. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 244: Linksys Key System Parameters

    The choices are: none, G.711u, or G.711a. Defaults to none. Provisioning Tab For information about the Provisioning page, see the Cisco Small Business IP NOTE Telephony Devices Provisioning Guide. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 245: Regional Tab

    It is triggered by a, (comma) character encountered in the dial plan. Defaults to 420@-16;10(*/0/1). Prompt Tone Prompts the user to enter a call forwarding phone number. Defaults to 520@-19,620@-19;10(*/0/1+2). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 246

    Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. Defaults to 914@-16,1371@-16,1777@-16;20(.274/0/ 1,.274/0/2,.380/0/3,0/4/0). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 247

    Page Tone Specifies the tone transmitted when the paging feature is enabled. Defaults to 600@-16;.3(.05/0.05/1). Alert Tone Played when an alert occurs. Defaults to 600@-19;.2(.05/0.05/1). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 248: Distinctive Ring Patterns

    Defaults to 60(4.5/4). Cadence 8 Cadence script for distinctive ring 8. Defaults to 60(0.25/9.75) Cadence 9 Cadence script for distinctive ring 9. Defaults to 60(.4/.2,.4/2). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 249

    Range: 0–64 seconds. Defaults to 3. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 250: Vertical Service Activation Codes

    Forwards no-answer calls to the extension specified after the activation code. Defaults to *92. Cfwd No Ans Deact Code Cancels call forwarding of no-answer calls. Defaults to *93. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 251

    DND Deact Code Disables the do not disturb feature. Defaults to *79. Secure All Call Act Code Makes all outbound calls secure. Defaults to *16. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 252

    The star code used for picking up a group call. Defaults to *37. Media Loopback Code The star code used for media loopback. Defaults to *03. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 253

    IP phone. You can empty the corresponding *code that you do not want to IP phone to process. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 254

    In that case, simple add that *code in the dial plan and the IP phone send INVITE *73@..as usual when user dials *73. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 255: Vertical Service Announcement Codes

    Only one G.722 call at a time is allowed. If a conference call is placed, a SIP re-invite message is sent to switch the calls to narrowband audio. NOTE Not supported on the WIP310. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 256

    Makes this codec the only codec that can be used for the associated call. Defaults to *0272616. NOTE Not applicable to WIP310 or Cisco SPA 525G/ 525G2. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 257

    Defaults to *01729. Force G729a Code Makes this codec the only codec that can be used for the associated call. Defaults to *02729. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 258: Time (cisco Spa 525g/525g2 Only)

    Sets the local date (mm represents the month and dd represents the day). The year is optional and uses two or four digits. NOTE Not applicable to the Cisco SPA 525G/525G2. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 259

    Time Offset (HH/mm) This specifies the offset from GMT to use for the local system time. NOTE Found in the Time section for the Cisco SPA 525G/525G2. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 260

    If <day> is 1, it means the <weekday> on or before the end of the month (in other words the last occurrence of < weekday> in that month). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 261

    Defaults to . 1 . Inband DTMF Boost Controls the amount of amplification applied DTMF signals. Choices are OdB, 3dB, 6dB, 9dB, 12dB, 15dB, or 18dB. Defaults to 12dB. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 262

    Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 263

    Cisco SPA900 series phones. If set to UTF-8, line keys and other labels entered via the configuration utility containing UTF-8 characters will be displayed correctly on the phone. (SIP only) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 264: Phone Tab

    Name to identify this station; appears on the LCD screen on phone models that have a display. No spaces are allowed and the name must be unique. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 265

    Not applicable to the WIP310 or SPA 301. On the Cisco SPA 525G/525G2, this setting is located in the User tab. See Screen (Cisco SPA 525G/525G2), page 290. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 266

    NOTE Not applicable to the WIP310, SPA 301, or SPA 501. Screen saver settings are found in the User tab on the Cisco SPA 525G/525G2. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 267: Line Key

    Extension Extension number of the line key. Short Name A short label shown on the LCD display for line key 1 through line key 6. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 268

    (the usr and ext keywords are interchangeable) NOTE Not applicable to the WIP 310, SPA 301, or SPA 501. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 269: Miscellaneous Line Key Settings

    LED pattern during the Idle state, where the call appearance is not is in use and is available to make a new call. Leaving this entry blank indicates the default value of c=g. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 270

    LED pattern during the Local Active state, where the call appearance is engaged in an active call. Leaving this entry blank indicates the default value of c=r. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 271: Supplementary Services

    LED pattern to indicate that a shared trunk has been reserved. Supplementary Services Enable or disable the corresponding supplementary services on the phone. A value of “yes” indicates enabled; “no” indicates disabled. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 272

    Enable/disable call-forward-on-busy service. Defaults to yes. Cfwd On No Ans Serv Enable/disable call-forward-on-no-answer service. Defaults to yes. Paging Serv Enable/disable the paging service. Defaults to yes. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 273: Ring Tone (cisco Spa 300 Series And Cisco Spa 500 Series)

    Each entry defines a ring tone to be used on the phone, with an ID between 1 and 10. The ID can be used in a DirEntry to indicate which ring tone to use when the corresponding caller calls. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 274: Ring Tone (wip310)

    Select no to silence the keypad. Keypad Tone Volume Corresponds to the volume of the keypad tone. Default is 5. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 275: Auto Input Gain (db)

    Speakerphone Additional Applies additional input gain to the speakerphone. Input Gain NOTE Does not apply to the SPA 525G/525G2, SPA 301, or the SPA 501. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 276: Multiple Paging Group Parameters

    The Cisco SPA 300 Series and Cisco SPA 500 Series supports the BroadSoft directory feature and synchronization of Do Not Disturb and Call Forward. The following configuration fields are available: Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 277

    Not applicable to the Cisco SPA 301 or Cisco SPA 501. Directory Password Alphanumeric password associated with the User ID. NOTE Not applicable to the Cisco SPA 301 or Cisco SPA 501. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 278: Directory Search

    Enter a free-form text name, such as “Corporate Directory.” LDAP Server Enter a fully qualified domain name or IP address of LDAP server, in the following format: nnn.nnn.nnn.nnn Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 279

    This defines the search for the common name [cn]. For example, cn:(cn=*$VALUE*). This search allows the provided text to appear anywhere in a name, beginning, middle, or end. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 280

    • p—phone number When p is assigned to a type attribute, example t=p, then the retrieved number will be dialable by the phone. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 281: Xml Service

    XML Service The Cisco SPA 300 Series and the Cisco SPA 500 Series IP Phones support XML services, such as an XML Directory Service or other XML applications. (Not applicable to the Cisco SPA 301 or the Cisco SPA 501.)

  • Page 282

    Dialing Input Key List Softkeys that display when the user must enter dialing data. See Customizing Phone Softkeys, page 52 for more information. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 283

    Softkeys that display when a call is on hold on a shared line. See Customizing Phone Softkeys, page 52 for more information. (SPA 525G/525G2 only) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 284

    SIP Settings, page 275 • Call Feature Settings, page 278 • Proxy and Registration, page 281 • Subscriber Information, page 283 • Audio Configuration, page 284 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 285: General

    When enabled, the message waiting indicator lights only for messages on private lines. Monitor User ID (Cisco SPA This field is for future use. 300 Series, Cisco SPA 500 Series) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 286: Nat Settings

    TOS/DiffServ field value in UDP IP packets carrying a SIP message. Defaults to 0x68. SIP CoS Value CoS value for SIP messages. Defaults to 3. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 287: Sip Settings

    SIP Transport Select from UDP, TCP, or TLS. Defaults to UDP. SIP Port Port number of the SIP message listening and transmission port. Defaults to 5060. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 288

    To contact the refer-to target, select yes. Otherwise, select no. Default: no Referee Bye Delay For the Referee Bye Delay, enter the appropriate period of time in seconds. Defaults to 0. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 289

    180 SIP responses after receiving the first 183 SIP response for an outbound INVITE. To enable this feature, select yes. Otherwise, select no. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 290: Call Feature Settings

    To use this feature, select yes. Otherwise, select no. Defaults to no. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 291

    Defaults to blank. Auth Page Password Identifies the password used when the Auth Page parameter is set to Yes. This parameter accepts alphanumeric characters. Defaults to blank. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 292

    With this parameter set to yes, the phone logs the call as being from Mary@domain2.com, and John can dial Mary from the received call list. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 293: Proxy And Registration

    Whether to force SIP requests to be sent to the outbound proxy within a dialog. Ignored if <Use Outbound Proxy> is no or <Outbound Proxy> is empty. Defaults to yes. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 294

    Defaults to 3600 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 295: Subscriber Information

    Defaults to blank. SRTP Private Key Base64 encoded of the 512-bit private key per subscriber for establishment of a secure call. Defaults to blank. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 296: Audio Configuration

    If Pref Codec Only i s enabled (set to yes), this parameter is not used. Defaults to Unspecified. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 297

    To enable the use of the G.726 codec at 40 kbps, select yes. Otherwise, select no. Defaults to yes. NOTE Not applicable to the Cisco SPA 525G/525G2. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 298

    DTMF tone is not relayed to the remote end. As a workaround for the phone to interoperate with those gateways, you can change the value to a value greater than 0. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 299: Dial Plan

    Dial Plan parameter. With this parameter, you can specify how to map a caller ID number for display on screen and recorded into call logs. (Not applicable to WIP310.) Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 300: User Tab

    Defaults to voice mail. Cfwd No Ans Delay Enter the time delay in seconds to wait before forwarding a call that is not answered. Defaults to 20 seconds. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 301: Speed Dial

    WIP310. Speed dial configuration from the WIP310 is done on the phone. You can also configure speed dials on the Cisco SPA 300 Series and Cisco SPA 500 Series IP phones; see the User Guide for the phone for more information.

  • Page 302: Audio Volume

    (The screen shows “Press any key to unlock your phone.”) If a user password is set, the user must enter it to exit screen saver mode. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 303

    Select from Default, Download BMP Picture, or Text Logo. Defaults to Default. For more information, see the “Configuring Phone Information and Display Settings” section on page 36 Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 304: Attendant Console Tab (cisco Spa 500 Series)

    Unit 1 Enable Enables or disables the first Cisco SPA 500S unit (each IP phone can have up to two Cisco SPA 500Ss attached). Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 305: Unit

    500S unit. Keywords and values are case-sensitive. The configuration script is described in the “Setting Up the Cisco SPA 500S Attendant Console” section on page 188. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 306: Attendant Console Status

    Cisco SPA IP Phone Field Reference Attendant Console Status Attendant Console Status This page provides two tabs to display the status of up to two Cisco SPA 500S units that are supported by a single IP phone: • Unit 1—Displays information about the first Cisco SPA 500S unit.

  • Page 307: Cisco Spa 525g/525g2-specific Tabs

    Parameter Description Bluetooth Device Click On to enable Bluetooth. Shows the name and status of any connected Bluetooth Status (Cisco SPA 525G2 only) Bluetooth devices. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 308: Personal Address Book

    MAC address, and device name. Personal Address Book Cisco Small Business IP Address book for the phone. For more information, see the Phone SPA 525G/525G2 User Guide Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 309: Call History

    • Missed Calls Speed Dials Speed Dial, page 289. Firmware Upgrade Used to upgrade the firmware for the Cisco SPA 525G/525G2. See Upgrading Firmware, page Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

  • Page 310: Where To Go From Here, Product Resources

    Where to Go From Here Cisco provides a wide range of resources to help you obtain the full benefits of the Cisco Small Business IP Phones. Product Resources Support Cisco Small Business www.cisco.com/go/smallbizsupport Support Community Online Technical Support www.cisco.com/support and Documentation...

  • Page 311

    Cisco SPA9XX Phone Administration Guide on cisco.com. This guide covers only the Cisco SPA 300 Series IP phones, Cisco SPA 500 Series IP phones, and the Cisco WIP310. Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide...

Comments to this Manuals

Symbols: 0
Latest comments: