Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to
any authorised repair agent who will collect
them on our behalf.
You can check the location of your
nearest authorised repair agent by
contacting your local Black & Decker
office at the address indicated in this
manual. Alternatively, a list of authorised
Black & Decker repair agents and full
details of our after-sales service and
contacts are available on the Internet at:
Battery (fig. H)
Black & Decker batteries can
be recharged many times. At
the end of their useful life,
discard batteries with due care
for our environment.
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in
accordance with local regulations.
Discharge the battery by operating
the appliance until the motor stops.
The battery is located under the back
end of the appliance.
Remove the crevice tool from the
Push the slider (12) towards the front
of the product.
Remove the accessory holder.
Strike the product on a firm and
stable surface as shown in fig. H to
dislodge the battery.
Place the battery in suitable
packaging to ensure that the
terminals cannot be short-circuited.
Take the battery to your service
agent or a local recycling station.
Warning! Once removed, the battery
cannot be refitted.
Approx. charging time
(sound pressure): 85 dB(A), hand/arm
weighted vibration 2,5 m/s