Intended Use; Safety Instructions - Black & Decker Dustbuster Manual

Hide thumbs Also See for Dustbuster:
Table of Contents

Advertisement

Intended use

Your Black & Decker Dustbuster
has been designed for light dry vacuum cleaning
purposes.The appliance is powered from a car electrical
system and connected by the cigarette lighter socket. This
appliance is intended for domestic use only.

Safety instructions

Warning! When using battery-powered appliances, basic
safety precautions, including the following, should always be
followed to reduce the risk of fire, leaking batteries, personal
injury and material damage.
Read all of this manual carefully before using the
appliance.
The intended use is described in this manual. The use
of any accessory or attachment or the performance of
any operation with this appliance other than those
recommended in this instruction manual may present a
risk of personal injury.
Retain this manual for future reference.
Using your appliance
Do not use near water.
Do not use the appliance to pick up liquids or any
materials that could catch fire.
Do not immerse the appliance in water.
Never pull the power cord to disconnect the appliance
from the socket. Keep the power cord away from heat,
oil and sharp edges.
This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should be
supervised to ensure that they do not play with the
appliance.
After use
Unplug the appliance before cleaning.
When not in use, the appliance should be stored in a dry
place.
Children should not have access to stored appliances.
Inspection and repairs
Before use, check the appliance for damaged or
defective parts. Check for breakage of parts, damage to
switches and any other conditions that may affect its
operation.
Do not use the appliance if any part is damaged or
defective.
®
auto car vacuum cleaner
Have any damaged or defective parts repaired or
replaced by an authorized repair agent.
Regularly check the power cord for damage.
Never attempt to remove or replace any parts other than
those specified in this manual.
Additional safety instructions for accessory plugs and
sockets
To reduce the risk of fire make sure that the 12 Vdc outlet is
free from debris and when the adapter plug is fitted, make
sure that it is a tight connection.
Features
This appliance includes some or all of the following features.
1. On/off power switch
2. Removable hose/handle
3. Locking ring
4. Hose
5. Filter cleaning wheel
6. Transparent door
7. Door latch
8. 2 in 1 combi brush accessory
9. Accessory clip
10. Crevice tool
Assembly
Mounting accessories (fig. A & B)
The 2-in-1 combi nozzle (8) has a brush that can be folded
forward for dusting and upholstery cleaning.
The crevice tool (10) allows for vacuuming in narrow and
hard to-reach places.
To fit an accessory press the accessory clip (9) and
slide the accessory onto the handle (2).
To remove an accessory, press the accessory clip (9)
and remove the accessory.
The handle (2) can be removed from the hose (4) allowing
the accessories to be connected directly to the hose cuff (11)
when required. To remove the handle:
Unclip the handle (2) from the appliance.
Rotate the locking ring (3) anti-clockwise to release the
clips.
Pull the hose (4) away from the handle (2).
Fit the accessory directly to the hose cuff (11).
To refit the handle:
Remove the accessory from the hose.
Push the hose (4) into the handle (2). Rotate the locking
ring (3) clockwise until it clicks into place.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents