Download Print this page

Technical Data; Troubleshooting - Black & Decker FSM1630ND Manual

Hide thumbs

Advertisement

mop to be hung from a suitable hook on the wall. Always
ensure that your wall hook is capable of supporting the weight
of the steam mop safely.

Technical data

Voltage
V
ac
Power
W
Tank capacity
ml
Weight
kg

Troubleshooting

If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local Black & Decker repair agent.
Problem
Step
Possible solutions
Check the unit is plugged in at the wall
The steam mop is
1
socket.
not turning on.
Check the unit is switched on using the on/
2
off switch (1).
3
Check the fuse in the plug.
Check that the handle (4) of the steam mop
The digital controls
4
is pushed firmly into the steam mop body
do not light up.
(12). Check that the arrow on the handle is
flush with the top of the steam mop body
(12).
5
Check steps 1, then 2, then 3.
The steam mop will only produce steam
The steam mop is
6
once the handle is pulled back from the
not producing
upright position.
steam.
Check that the water tank (3) is full and
7
correctly fitted.
NOTE: When first filled or after running dry it
can take up to 45 seconds for steam to be
produced.
Check that the Steam head (5) is firmly
8
docked into the steam mop body (12).
9
Check steps 1, then 2, then 3.
The digital controls
10
Check steps 4, then 5, then 1, then 2, then 3
go out during use.
The steam mop
11
Check steps 6, then 7, then 8, then 4, then 3.
stops producing
steam during use.
FSM1630
(Type 1)
230
1600
500
3.4
(Original instructions)
Problem
Step
Possible solutions
The steam mop has 3 settings. Press the
The steam mop is
12
autoselect button (2) to reduce the amount of
producing too
steam being produced.
much steam during
use.
Check that the steam burst button (18) has
13
not been pressed.
The steam mop has 3 settings. Press the
The steam mop is
14
autoselect button (2) to increase the amount
producing too little
of steam being produced.
steam during use.
Press the steam burst button (18) to
15
temporarily increase the amount of steam.
Refer to the assembly chapter of the manual
Steam is escaping
16
for correct fitting instructions of all parts and
from unexpected
accessories.
areas of the unit.
Where can I get
17
www.blackanddecker.co.uk/steammop
further information
www.blackanddecker.ie/steammop
/ accessories for
my steam mop.
ENGLISH
7

Advertisement

loading