File Type - Brother DCP-L2520DW Basic User's Manual

3
Press a or b to display the Scan to PC
option, and then press OK.
4
Press a or b to display the File option,
and then press OK.
5
If the machine is connected to a
network, press a or b to display the
computer where you want to send the
document, and then press OK.
6
Do one of the following:
• To change the scan settings for this
document, press a or b to select Yes,
and then press OK. Go to the next
step.
• To use the default scan settings,
press a or b to select No, and then
press OK. Press Start.
The machine starts scanning. If you
are using the machine's scanner
glass, follow the LCD instructions to
complete the scanning job.
• In order to change scan settings,
Brother's Control Center software must
be installed on a computer connected
to the machine.
7
Select the scan settings you want to
change:
• Scan Type
• Resolution

• File Type

• Scan Size
• Remove Bkg. Clr
(available only for the Color and
Gray options.)
8
Press Start.
The machine scans the document.
30