1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on the LAN connection using LAN cable, see page 28.
Use only the AC power adaptor (JEITA type4)
supplied with the unit. Do not use any other AC
Polarity of the plug
HDMI cable (not supplied)
to HDMI VIDEO
VISCA cable (not supplied)
to VISCA RS-232 IN
to VISCA RS-232 OUT To VISCA IN of other
LAN cable (not supplied)
to HDMI input
SRG series (when
connecting to more
than one camera)
Computer with LAN or
interface, HD video
monitor with HDMI
input interface, etc.
AC power adaptor (supplied)
Power cord (supplied)
You have to set the video format of the signal to be
output from the camera. For detailed information on
how to set the video format, see " SYSTEM
SELECT switch" on page 7.
to AC outlet