Download Print this page
   

Advertisement

Installing Guide Of Honda CR-V
Navigation& Entertainment System
Navigation& Entertainment System
Navigation& Entertainment System
Navigation& Entertainment System
Installation Flow
Installation Flow
Installation Flow
Installation Flow
(V1.1)
(V1.1)
(V1.1)
(V1.1)
01
The original car CD unit. . . .
03
Remove left&right air outlet device.
05
Remove the screw in the left conor of original
CD y using the 8MM sleeve.
07
Take out the original Radio.
02
Pry the cover panel on the right and left side of
air conditioner frame.
04
Picture without air outlet device.
06
Remove the screw in the right conor of original
CD y using the 8MM sleeve.
08
Disconnect the Emergency power joint in the
backside of the panel.

Advertisement

   Also See for Honda CR-V

   Summary of Contents for Honda CR-V

  • Page 1

    Installing Guide Of Honda CR-V Navigation& Entertainment System Navigation& Entertainment System Navigation& Entertainment System Navigation& Entertainment System Installation Flow Installation Flow Installation Flow Installation Flow (V1.1) (V1.1) (V1.1) (V1.1) The original car CD unit. . . . Pry the cover panel on the right and left side of air conditioner frame.

  • Page 2

    Disconnect the backside original harness. Assemble the original CD mounting bracket to our machine. Assemble the Buckle & Emergency button of Picture show our dedicated power line (the 5 original CD unit to our machine. wires marked by the red circle connect to the main power cables according to the S/N in the wires and cables).

  • Page 3

    Our dedicated power line connect to main power Picture show our dedicated power line connect of original car (bule circle part connect to to out machine Install our machine and original original car antenna, red circal part is CAN, Air conditioning outlet device. yellow circle part connect to AUX wire, green circle part connect to main power cable).

Comments to this Manuals

Symbols: 0
Latest comments: