Playing A Tape; Recording On A Tape - Sony CFD-E75L Service Manual

Playing a tape

Connect the supplied mains lead (see page 24).
1
Press xZ to open the tape
compartment and insert a recorded
tape. Use TYPE I (normal) tape only.
Close the compartment.
2
Press n.
The player turns on (direct power-on)
and starts playing.
GB
8

Recording on a tape

Connect the supplied mains lead (see page 24).
1
Press xZ to open the tape
compartment and insert a blank tape.
Use TYPE I (normal) tape only.
2
Select the programme source you
want to record.
To record from the CD player, insert
a CD (see page 4) and press x on the
CD section.
RADIO To record from the radio, tune in the
station you want (see page 6).
BAND
AUTO PRESET
10 GB
1 2
With the side you want
to play facing you
Display
1 3
With the side you want to
record on facing you
Display
Use these buttons for additional operations
To
adjust the volume
stop playback
fast-forward or rewind the tape
pause playback
eject the cassette
turn on/off the player
3
Press z to start recording
(n is depressed automatically).
Use these buttons for additional operations
Tips
To
• Adjusting the volume or the
stop recording
audio emphasis (see page
18) will not affect the
pause recording
recording level.
• If the AM/MW/LW
programme makes a
turn on/off the player
whistling sound after you've
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that most decreases
the noise.
• For the best results, use the
AC power as a power
source.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Press X.
3 Press n.
4 Press z.
5 Press X.
CFD-E75L
OPERATE
VOLUME +, –
m, M
xZ
X
Press
VOLUME +, –
(VOL +, – on the remote)
xZ
m or M
X
Press the button again to
resume play after pause.
xZ
OPERATE
9 GB
OPERATE
MODE
n
xZ
X
Press
xZ
X
Press the button again to resume
recording.
OPERATE
GB
11
5