Advertisement
3.Installation (MX-FX13 and MX-NB12)
Turn off the main switch of the machine and then remove the power
plug of the machine from the outlet.
1) Remove the rear cabinet.
Remove screws. Remove the rear cabinet and the rear cabinet cover.
(1)
(1)
(3)
(1)
2) Connect the bundled AC harness to the power PWB of the
machine.
Note: Connect the connector with the insulation tube of the AC harness
to the power PWB of the machine.
(1)
(1)
(1)
(1)
(1)
(4)
(2)
MX-M232D (MX-FX13/XB17) 6 - 5
3) Remove the USB devise connector PWB.
<1>Remove one screw.
<2>Remove the USB device connector PWB Unit.
<3>Remove the screw and remove the USB devise connector PWB.
(2)
(3)
4) Install Network Expansion Unit.
<1>Hook the attaching parts of Network Expansion Unit onto the
machine frame.
<2>Secure the unit onto the machine using 4 screws.
<3>Connect the AC harness, which is connected to the power PWB in
the machine, to the Network Expansion Unit. Connect 2 harnesses
to MCU PWB.
(1)
(2)
(3)
(3)
(2)
(4)
5) Connect the FAX power Harness.
(1)
(2)
(2)
(3)
Advertisement
