Safety instructions after completing work
The transport guard should always be ﬁtted to the
cutting attachment when the machine is not in use.
Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
Always wear heavy gloves when replacing the cutters.
The cutters are extremely sharp and can easily cause
Store the machine out of reach of children.
Use only original spare parts for repairs.
Basic working techniques
Always ensure you have a safe and stable working
Always hold the machine with both hands.
Place the tip of the drill on the ice.
Open the throttle gradually when the drill begins to
bite into the ice.
Keep a ﬁrm grip on the handles and be ready to
take the weight when the drill tip goes through the
When you have ﬁnished drilling for the time being, drill
a short distance into the ice so that the machine
stands up by itself. By leaving the machine like this
you reduce the risk of anyone accidentally coming into
contact with the cutters.
Always turn off the engine when you have ﬁnished