Download Print this page

Starting And Stopping; Check Before Starting - Husqvarna 159LEB Operator's Manual

Ice drill
Hide thumbs

Advertisement

Check before starting

Check the cutters. Never use cutters that are blunt,
cracked or damaged.
Check that the machine is in perfect working order.
Check that all nuts and screws are tight.
Check that the cutting attachment always stops when
the engine is idling.
Only use the machine for the purpose it was intended
for.
Make sure that the handle and safety features are in
good working order. Never use a machine that lacks a
part or has been modified outside its specifications.
All covers must be correctly fitted and undamaged
before you start the machine.
12 – English

STARTING AND STOPPING

Starting and stopping
WARNING! Always move the machine
!
about 3 metres from the refuelling
position before starting. Place the
machine on a flat surface. Ensure the
cutting attachment cannot come into
contact with any object. Make sure no
unauthorised persons are in the working
area, otherwise there is a risk of serious
personal injury.
Cold engine
Primer bulb: Press the air purge repeatedly until fuel
begins to fill the bulb. The bulb need not be completely
filled.
Choke: Set the choke control in the choke position.
Warm engine
Primer bulb: Press the air purge repeatedly until fuel
begins to fill the bulb. The bulb need not be completely
filled.

Advertisement

loading

This manual is also suitable for:

326ai25