KERUI KR8218G User Manualr page 20

2. Set the User code for CID system
→
On Panel:
2.1 Set CID User Code
Set On Panel: Press
→press
to save.
Set On APP Page 3:
3. Set the Signal Accuracy for CID
Set On Panel: Press
to save.
Set by SMS: [1234]+[83]+[ Accuracy level 0-9] +[#] Normally Choose No. 4
4. Set the report of arm/disarm to CID
Set On Panel: Press
【No sent】/【Arm】/【Disarm】/【All】,press
→【8.CID setting】
Picture 5-6
enter【8.CID setting】→input 4 digits CID coding behind 【User Coding】
to
→Click CID
Number
Setting
to enter【8.CID setting】→Input the (0-9) to behind【CID Accuracy】→Press
【 8.CID setting】 →then press
to enter
behind 【Arm&Disarm】 to switch
to save
19
→ Input User Code,
Click Send
Same As SMS Setting:
[1234]+[92]+
[AAAA 0-9] +[#]