MiTAC PD10BI Product Manual
  1. Manuals
  2. Brands
  3. MiTAC Manuals
  4. Motherboard
  5. PD10BI
  6. Product manual

MiTAC PD10BI Product Manual

Desktop board
Hide thumbs
Table of Contents

Advertisement

Quick Links

MITAC Desktop Board PD10BI
Product Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PD10BI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MiTAC PD10BI

Summary of Contents for MiTAC PD10BI

  • Page 1 MITAC Desktop Board PD10BI Product Guide...

  • Page 2: Desktop Board Features

    Desktop Board Features This chapter briefly describes the features of Desktop Board PD10BI. Table 1 summarizes the major features of the Desktop Board. Feature Summary 1. M TAC D PD10BI F ABLE ESKTOP OARD EATURES Form Factor Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters [6.7 inches] x 170.18 millimeters [6.7 inches])
  • Page 3 (multiplexed with an mSATA port, routed to the PCI Express Full-/Half-Mini Card slot) Legacy I/O Legacy I/O Controller (NCT6683D) that provides: Hardware management support Serial ports onboard headers Parallel port via an onboard header LAN Support Realtek RTL8111G-CG Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs BIOS...

  • Page 4: Desktop Board Components

    Desktop Board Components Figure 1 shows the approximate location of the major components on the top side of MiTAC Desktop Board PD10BI. Figure 1. MiTAC Desktop Board PD10BI Components (Top)
  • Page 5 2. M TAC D PD10BI C ABLE ESKTOP OARD OMPONENTS HOWN IN IGURE Back Panel Connectors Power 4pin header Power 2pin header Half length miniPCIe connector SATA 3G header SATA 3G header SATA power header CPU FAN header DDR3 memory slot...

  • Page 6: System Memory

    Processor MITAC Desktop Board PD10BI includes a passively-cooled, Intel Bay Trail-D processor with integrated graphics and memory controller. The processor is soldered to the Desktop Board and is not customer upgradeable. NOTE The board is designed to be passively cooled in a properly ventilated chassis. Chassis venting locations are recommended above the processor heatsink area for maximum heat dissipation effectiveness.

  • Page 7: Connecting To The Internal Headers And Connectors

    Connecting to the Internal Headers and Connectors Front panel main header Figure 2 Front panel main header pin-out Signal Name Description Signal Name Description Pull-up resistor (750 ) to +5V HDD_POWER_LED POWER_LED_MAIN [Out] Front panel LED (main color) HDD_LED# [Out] Hard disk activity LED POWER_LED_ALT [Out] Front panel LED (alt color) GROUND...
  • Page 8 Chassis Intrusion Detection Header The chassis intrusion detection header must be 1x2, 2.54mm pitch, colored black and with extended back, as defined in below Figure 3 Chassis intrusion detection header Signal Name Intrusion Detection Ground ABLE HASSIS INTRUSION DETECTION HEADER SIGNALS HD Audio front panel audio header Figure 4 HD Audio front panel audio header pin-out diagram...
  • Page 9 Signal name Description Front panel microphone input signal (biased when supporting stereo microphone) AUD_GND Ground used by analog audio circuits MIC BIAS Microphone power / additional MIC input for stereo microphone support Active low signal that signals BIOS that an Intel HD Audio dongle is connected to the PRESENCE# analog header_ PRESENCE# = 0 when an Intel HD Audio dongle is connected.
  • Page 10 Internal Speaker header Figure 5 Internal Speaker header pin-out diagram Signal Name A_GND Front_L Front_R A_GND ABLE NTERNAL PEKAER HEADER Front panel USB header (Dual Ports) Figure 6 Front panel USB header pin-out Signal Signal +5V DC +5V DC Data (negative) Data (negative) Data (positive) Data (positive)
  • Page 11 Front panel USB header (Single Ports) Figure 7 Front panel USB header pin-out Signal +5V DC Data (negative) Data (positive) Ground Key (no pin) ABLE RONT PANEL HEADER SIGNALS LVDS inverter power header Figure 8 LVDS inverter power header Pin Signal Name Description 1 BKLT_EN Backlight enable...
  • Page 12 LVDS data header Figure 9 LVDS data header Signal Description 1 LA_DATAP3 LVDS Channel A diff data output - positive 2 LA_DATAN3 LVDS Channel A diff data output - negative 3 LA_DATAP2 LVDS Channel A diff data output - positive 4 LA_DATAN2 LVDS Channel A diff data output - negative 5 LA_DATAP1...

  • Page 13: Serial Port Header

    32 BKLT_EN 33 BKLT_CTRL 34 LB_CLKP LVDS Channel B diff data output - positive 35 LB_CLKN LVDS Channel B diff data output - negative 36 BKLT_PWR Selectable BKLT power output 37 BKLT_PWR Selectable BKLT power output 38 BKLT_PWR Selectable BKLT power output 39 NC 40 EDID_DATA EDID/DDC data signal...

  • Page 14: Processor Fan Header

    Processor fan header Figure 11: Processor fan header Signal FAN_CTRL FAN_TACH VCC-12V 11: P ABLE ROCESSOR FAN HEADER System fan header Figure 12: System fan header Signal FAN_TACH L FAN_CTR 12: S ABLE YSTEM FAN HEADER...

  • Page 15: Panel Voltage Selection Header

    Panel voltage selection header Pins 2&4: jumper position for 3.3V Pins 6&4: jumper position for 5V Pins 3&4: jumper position for 12V Figure 13: LVDS panel voltage selection header Signal Name VCC3/3V LCD SEL PWR VCC/5V 13: LVDS ABLE PANEL VOLTAGE SELECTION HEADER...
  • Page 16 Inverter power voltage selection header Figure 14: Inverter power voltage selection header Signal Name 8V~19V LCD_VCC 14: I ABLE NVERTER POWER VOLTAGE SELECTION HEADER...

  • Page 17: Alternate Power Led Header

    Alternate Power LED header Figure 15 Alternate Power LED header Signal Name 1 MAIN COLOR LED 2 KEY 3 ALT COLOR LED 15: A ABLE LTERNATE OWER HEADER Parallel Port 2x13 pin header Figure 16 Parallel Port 2x13 pin header...
  • Page 18 16: P ABLE ARALLEL PIN HEADER...
  • Page 19 SATA power header Figure 17 SATA power header 17: SATA ABLE POWER HEADER...
  • Page 20 Digital microphone header Figure 18 Digital microphone header 18: D ABLE IGITAL MICROPHONE HEADER Custom Header Figure 19 Custom Header 19: C ABLE USTOM EADER...

  • Page 21: Spdif Out Header

    SPDIF Out header Figure 20 SPDIF Out header Signal Name Description Ground SPDIF_OUT SPDIF signal from the codec Key (no pin) Key (no pin) +5V_DC 5 V power (for optical/TOSLINK module) 20: SPDIF O ABLE UT HEADER eDP connector Figure 21 eDP connector...
  • Page 22 IGNAL IGNAL ODD_L ODD_L EDID_3.3 V ODD_L LCD_GND ODD_L LCD_GND ODD_L LCD_GND ODD_L ODD_CLK_P ODD_L ODD_CLK_N ODD_L BKLT_GND EVEN_L BKLT_GND EVEN_L BKLT_GND EVEN_L EDID_CLK EVEN_L BKLT_ENABLE EVEN_L BKLT_PWM_DIM EVEN_L EVEN_CLK_P EVEN_L EVEN_CLK_N EVEN_L BKLT_PWR EDID_GND BKLT_PWR LCD_VCC BKLT_PWR LCD_VCC LCD_VCC EDID_DATA ABLE CONNECTOR...

  • Page 23: Cmos Clear

    CMOS Clear CMOS Clear Normal Clear CMOS CMOS C ABLE LEAR BEHAVIOR...
  • Page 24 MITAC Desktop Board PD10BI BIOS Specifiction...
  • Page 25 1. Main Page Main Advanced Chipset Security Boot Save & Exit BIOS Information Item help BIOS Vender American Megatrends Core Version 5.009 Compliancy UEFI 2.3; PI 1.2 BIOS Version D7360X01 Build Date 12/22/2012 Processor Information Intel(R) Pentium(R) CPU J2900 @ 2.41GHz →←...
  • Page 26 Comment This field is not selectable. There is no help text associated with Field Name Build Date Default Value Display build time of the BIOS Comment This field is not selectable. There is no help text associated with Field Name Processor Information Value Display the installed CPU brand.

  • Page 27: Advanced Page

    2. Advanced Page Main Advanced Chipset Security Boot Save & Exit Wireless LAN 1 RF [Enabled] Item help Wireless LAN 2 RF [Enabled] Wake On Lan [Enabled] ►ACPI Settings ►SMART settings ►NCT6683D Super IO Configuration ►S5 RTC Wake Settings ►CPU Configuration →←...
  • Page 28 Help Enable or Disable Wake On Lan. Field Name ACPI Settings Help System ACPI Parameters. Comment Press Enter when selected to go into the associated Sub-Menu. SMART Settings Field Name Help System SMART settings. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name NCT6683D Super IO Configuration Help...
  • Page 29 Field Name Trusted Computing Help Trusted Computing Settings Comment Press Enter when selected to go into the associated Sub-Menu. Field Name USB Configuration Help USB Configuration Parameters. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name RealTek PCIe GBE Family Controller (MAC:00:22:4D:7F:87:60) Help...
  • Page 30 2.1 ACPI Settings Main Advanced Chipset Security Boot Save & Exit ACPI Settings Item help Enable ACPI Auto Configuration [Disabled] Enable Hibernation [Enabled] ACPI Sleep State [S3 (Suspend to RAM)] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values...

  • Page 31: Smart Self Test

    2.2 SMART Settings Main Advanced Chipset Security Boot Save & Exit SMART Settings Item help SMART Self Test [Disabled] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 32 2.3 NCT6683D Super IO Configuration Main Advanced Chipset Security Boot Save & Exit NCT6683D Super IO Configuration Item help Super IO Chip NCT6683D Serial Port 1 [Enabled] Serial Port 2 [Enabled] Parallel Port [Enabled] →← : Select Screen Device Mode [ECP and EPP 1.7 Mode] ↑↓...
  • Page 33 Help Change the Printer Port mode.
  • Page 34 2.4 S5 RTC Wake Settings Main Advanced Chipset Security Boot Save & Exit Wake system from S5 [Disabled] Item help Wake up hour Wake up minute Wake up second →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults...
  • Page 35 Field Name Wake up second(Show when Wake system from S5 set to Fixed Time) Default Value Possible Value 0 - 59 Help 0 - 59...
  • Page 36 Field Name Wake up minute increase(Show when Wake system from S5 set to Dynamic Time) Default Value Possible Value Help 1 - 5...
  • Page 37 2.5 CPU Configuration Main Advanced Chipset Security Boot Save & Exit CPU Configuration Item help Intel(R) Core(TM) CPU [CPU NAME] @ [CPU Freq.] GHz CPU Signature 30673 Microcode Patch Max CPU Speed 2000 MHz Min CPU Speed 800 MHz Processor Cores Intel HT Technology Supported Intel VT-x Technology...
  • Page 38 Default Value CPU Microcode Patch Revision Comment This field is not selectable. There is no help text associated with Field Name Max CPU Speed Default Value Displays the Max CPU Speed Comment This field is not selectable. There is no help text associated with Min CPU Speed Field Name Default Value...
  • Page 39 Field Name L1 Code Cache Default Value L1 Code Cache Size Comment This field is not selectable. There is no help text associated with Field Name L2 Cache Default Value L2 Cache Size Comment This field is not selectable. There is no help text associated with Field Name L3 Cache Default Value...
  • Page 40 Field Name Hyper-threading (Hided if HT not Supported) Default Value [Enabled] Possible Value Enabled Disabled Help Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disable only one thread per enabled core is enabled.
  • Page 41 2.6 PPM Configuration Main Advanced Chipset Security Boot Save & Exit PPM Configuration Item help EIST [Enabled] Turbo Mode [Enabled] CPU C state Report [Enabled] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 42 2.7 SATA Configuration Main Advanced Chipset Security Boot Save & Exit SATA Configuration Item help SATA Speed Support [Gen2] SATA Mode [AHCI] Serial ATA Port 0 Empty Serial ATA Port 1 Empty →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help...
  • Page 43 2.8 AMI Graphic Output Protocol Policy Main Advanced Chipset Security Boot Save & Exit Intel(R) Valley View Graphics Controller Item help Intel(R) GOP Driver [7.1.1005] Output Select [Output Devices] Brightnesst Setting →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values...
  • Page 45 2.9 Network Stack Configuration Main Advanced Chipset Security Boot Save & Exit Item help Network stack [Enabled] Ipv4 PXE Support [Enabled] Ipv6 PXE Support [Enabled] →← : Select Screen ↑↓ : Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 46 2.10 CSM Configuration Main Advanced Device Chipset Security Boot Save & Exit Compatibility Support Module Item help Configuration CSM Support [Enabled] CSM Module Version 07.74 GateA20 Active [Upon Request] Option ROM Message [Force BIOS] INT19 Trap Response [Immediate] Boot option filter [UEFI only] →←...
  • Page 47 Field Name Option ROM Message Default Value [Force BIOS] Possible Value Force BIOS Keep Current Help Set display mode for Option ROM Field Name INT19 Trap Response Default Value [Immediate] Possible Value Immediate Postponed Help BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE - execute the trap right away;...
  • Page 48 Legacy Help Determines OpROM execution policy for devices other than Network, Storage, or Video...
  • Page 49 2.11 Trusted Computing Main Advanced Chipset Security Boot Save & Exit Configuration Item help Security Device Support [Enable] TPM State [Enabled] Pending operation [None] Current Status Information →← : Select Screen TPM Enabled Status: [Enabled] ↑↓ : Select Item TPM Active Status: [Activated] Enter: Select TPM Owner Status:...
  • Page 50 Computer will reboot during restart in order to change State of Security Device. Field Name TPM Enabled Status: Default Value [Enabled] Comment This field is not selectable. There is no help text associated with it.
  • Page 51 Field Name TPM Active Status: Default Value [Activated] Comment This field is not selectable. There is no help text associated with it. Field Name TPM Owner Status: Default Value [Owned] Comment This field is not selectable. There is no help text associated with it.
  • Page 52 2.12 USB Configuration Main Advanced Chipset Security Boot Save & Exit USB Configuration Item help USB Devices: 1 Keyboard, 1 Mouse, 2 Hubs Legacy USB Support [Enabled] →← : Select Screen USB 3.0(XHCI) Support [Enabled] ↑↓ : Select Item USB 2.0(EHCI) Support [Disabled] Enter: Select +/- : Change Opt...
  • Page 53 Help Control the USB EHCI (USB 2.0) functions. One EHCI controller must always be enabled.
  • Page 54 2.13 Realtek PCIe GBE Family Controller (MAC:00:22:4D:7F:87:60) (If Network Stack IPv4/IPv6 enabled, create by RealTek UEFI PXE Driver) Main Advanced Chipset Security Boot Save & Exit Driver Information Item help Driver Name: Realtek UEFI UNDI Driver Driver Version 2.017 Driver Released Date: 2012/10/19 Device Information Device Name:...
  • Page 55 Comment This field is not selectable. There is no help text associated with it.
  • Page 56 3. Chipset Main Advanced Chipset Security Boot Save & Exit Output Panel Type [LVDS] Item help LVDS Interface Type [Dual Channel] LVDS Panel Type [VBIOS Default] DeepSx Power Policies [Disabled] Front Panel Audio [Auto] →← : Select Screen ↑↓ : Select Item Enter: Select DVMT Pre-Allocated [64MB]...
  • Page 57 1680x1050 LVDS 1920x1200 LVDS 1440x900 LVDS 1600x900 LVDS 1024x768 LVDS2 1280x800 LVDS 1920x1080 LVDS 2048x1536 LVDS Help Select LVDS panel used by Internal Graphics Device by selecting the appropriate setup item. DeepSx Power Policies Field Name Default Value Disabled Possible Value Disabled Enabled Help...
  • Page 58 Help Select AC power state when power is re-applied after a power failure.
  • Page 59 4. Security Main Advanced Chipset Security Boot Save & Exit Password Description Item help If Only the Administrator's password is set then this only limits access to Setup and is only asked for when entering Setup If ONLY the User’s password is set, then this Is a power on password and must be entered to boot or enter Setup.

  • Page 60: Hdd Password Configuration

    4.1 HDD Security Configuration Main Advanced Chipset Security Boot Save & Exit HDD Password Description Item help Allow Access to Set, Modify and Clear Hard Disk User and Master Password. User Password need to be installed for Enabling Security. Master Password can Be Modified only when successfully unlocked With Master Password in POST.

  • Page 61: Secure Boot Mode

    4.2 Secure Boot Mode Main Advanced Chipset Security Boot Save & Exit Item help System Mode Setup Secure Boot Disabled Secure Boot [Disable] →← : Select Screen Secure Boot Mode [Custom] ↑↓ : Select Item ►Key Management Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults...
  • Page 62 4.3 Key Managerment Main Advanced Chipset Security Boot Save & Exit Factory Default Key Provision [Disabled] Item help ►Enroll All Factory Default Keys ►Save All Secure Boot Variables Platform Key NOT INSTALLED ► Delete PK ► Set new PK Key Exchange Key NOT INSTALLED ►...
  • Page 63 Help Force System to User Mode - install all Factory Default keys(PK,KEK,db,dbx). Change takes effect after reboot Comment...
  • Page 64 Field Name Delete All Secure Boot Variables Help Force System to Setup Mode - clear all Secure Boot Variables(PK,KEK,db,dbx). Change takes effect after reboot Comment Field Name Save All Secure Boot Variables Help Store content of each Secure Boot Variable(data formatted as EFI_SIGNATURE_LIST) to a file with matching name on selected file system's root folder.
  • Page 65 Help Insert Factory Default Keys or load from a file formatted as: 1.Public Key Certificate in: a)EFI_SIGNATURE_LIST, b)EFI_CERT_X509 (DER encoded), c)EFI_CERT_RSA2048 (bin), d)EFI_CERT_SHA256 (bin) 2.Efi Time-Based Authenticated Variable Comment...
  • Page 66 Field Name Append KEK Help Insert Factory Default Keys or load from a file formatted as: 1.Public Key Certificate in: a)EFI_SIGNATURE_LIST, b)EFI_CERT_X509 (DER encoded), c)EFI_CERT_RSA2048 (bin), d)EFI_CERT_SHA256 (bin) 2.Efi Time-Based Authenticated Variable Comment Authorized Signature Field Name Default Value NOT INSTALLED Possible Value INSTALLED NOT INSTALLED...
  • Page 67 Field Name Delete DBT Help Delete the Variable from NVRAM. Removing PK will reset System to Setup Mode Field Name Set new DBT Help Insert Factory Default Keys or load from a file formatted as: 1.Public Key Certificate in: a)EFI_SIGNATURE_LIST, b)EFI_CERT_X509 (DER encoded), c)EFI_CERT_RSA2048 (bin), d)EFI_CERT_SHA256 (bin)
  • Page 68 b)EFI_CERT_X509 (DER encoded), c)EFI_CERT_RSA2048 (bin), d)EFI_CERT_SHA256 (bin) 2.Efi Time-Based Authenticated Variable...

  • Page 69: Fixed Boot Order Priorities

    5 Boot Boot mode select = UEFI Main Advanced Chipset Boot Security Save & Exit Boot Configuration Item help Setup Prompt Timeout Bootup NumLock State [On] Fast Boot [Disabled] Boot mode select [UEFI] FIXED BOOT ORDER Priorities Boot Option #1 [UEFI CD/DVD] Boot Option #2 [UEFI Hard Disk]...
  • Page 70 Boot mode select = LEGACY Main Advanced Chipset Security Boot Save & Exit Boot Configuration Item help Setup Prompt Timeout Bootup NumLock State [On] Fast Boot [Enabled] Boot mode select [Legacy] FIXED BOOT ORDER Priorities Boot Option #1 [CD/DVD] Boot Option #2 [Hard Disk] Boot Option #3 [USB KEY]...
  • Page 71 Possible Value Help Select the keyboard NumLock state...
  • Page 72 Field Name Fast Boot Default Value [Disabled] Possible Value Enabled Disabled Help Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Field Name Boot mode select Default Value [UEFI] Possible Value...
  • Page 73 Field Name Boot Option #6 Default Value [UEFI USB Hard Disk] Possible Value CD/DVD, Hard Disk, Network, USB CD/DVD, USB Hard Disk, USB KEY, USB Floppy, UEFI Help Set boot Priority Boot mode select = LEGACY Field Name Boot Option #1 Default Value [CD/DVD] Possible Value...
  • Page 74 Field Name Boot Option #7 Default Value [USB Floppy] Possible Value CD/DVD, Hard Disk, Network, USB CD/DVD, USB Hard Disk, USB KEY, USB Floppy, UEFI Help Set boot Priority Field Name CD/DVD ROM Drive BBS Priorities Help Specifies the Boot Device Priority sequence from available CDROM/DVD Drives.
  • Page 75 Field Name UEFI CD/DVD ROM Drive BBS Priorities Help Specifies the Boot Device Priority sequence from available CDROM/DVD Drives. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name UEFI Hard Disk Drive BBS Priorities Help Specifies the Boot Device Priority sequence from available Hard Disk Drives.
  • Page 76 6 Save & Exit Main Advanced Chipset Security Boot Save & Exit Save Changes and Reset Item help Discard Changes and Reset Save Options Restore user Defaults Restore Defaults Restore Defaults Save as user Defaults Restore user Defaults Restore Windows 8-64 bits Defaults Restore Windows 8-32 bits Defaults →←...
  • Page 77 Field Name Discard Changes Help Discard Changes done so far to any of the setup options. Comment Field Name Restore Defaults Help Restore/Load Default values for all the setup options. Comment Field Name Save as User Defaults Help Save the changes done so far as User Defaults. Comment Field Name Restore User Defaults...

Table of Contents