• Align the glass tray (4) on top of the
• Connect the appliance to a suitable
Setting the Clock
When the microwave oven is connected to
a suitable electrical supply, the oven will
To set the correct time, for example: To set
1 Press the "Clock/Pre-set"
The hour ﬁgures will ﬂash.
2 Press the number buttons "8","0","0" in
3 Press AM/PM
4 Press the "Clock/Pre-set"
to ﬁnish setting the clock. The time will
be shown in the LED display.
Note: If "Stop/Clear"
pressed or if there is no operation within 1
minute, the oven will revert to its previous
This appliance also has a handy "Kitchen
button. This can be operated
1 Press " Kitchen Timer"
LED display will show 00:00, and the clock
indicator will be lit.
The ﬁrst "0" will ﬂash, the ":" and the other
"0" will light up.
2 Use the numeric buttons to enter the
required alarm time.
3 Press "Start/+30Sec."
conﬁrm the setting. The clock indicator will
4 When the set time arrives, the clock
indicator will go out and an audible alarm
will be heard.
If the clock has been set previously, the
LED will display the current time.
Use (Fig. C)
Press the door release (8) to open the oven
door then place the container onto the
glass tray (4).
Close the door & press the Microwave
button repeatedly until the required power
setting is shown in the LED display.
Remarks: When a power between level
10-8 is chosen, the high level indicator
will light up and it will ﬂash when in
When a power between level 7-1 is
chosen, the low level indicator
up and it will ﬂash when in operation.
Press the " Power"
LED shows the required power level. "
" or "
Enter the required cooking time using the
Note: The maximum cooking time is 99
minutes and 99 seconds.
Press the "Start/+30Sec"
start cooking. The cooking time will be
displayed and will count down during
cooking. ":", "
will ﬂash in the LED display.
Note: In the process of cooking, if the
there is no operation within 1 minute, the
oven will go back to the former setting
Note: During Microwave cooking or grilling,
button can be pressed to display the
current microwave power in the LED for 3
seconds. After three seconds, the display
will revert to normal.
button until the
" will light up.
", and "
", or "
button is pressed or if
or "Grill / Combi"