Switch Off - Nokia BH-310 User Manual

Bluetooth mono headset
Hide thumbs Also See for BH-310:
Table of Contents

Advertisement

If you've paired the headset before, it connects to the last phone it was used with. If
the headset can't find that phone, it tries the next phone on its list of paired devices. If
not connected to a phone within 30 minutes, the headset switches off.

Switch off

Put the headset in the clip. The headset beeps, and a red indicator light flashes once.
All calls are ended.
Tip: Don't have the clip with you? To switch the headset off, press and hold
seconds. To switch the headset on, press
Wear the headset
Slide the earloop behind your ear, then gently push the earpiece against your ear. Point
the headset towards your mouth.
Change the earpad
1
The headset comes with different-sized earpads. Select the earpad that fits the best,
and is the most comfortable for your ear.
2
To change the earpad, pull the current earpad from the earpiece, and push the new
earpad into place.
The headset is set up to be used on your right ear.
Use the headset on your left ear
Remove and attach the earloop so that it is to the left of
When you're not using your headset, keep it in the clip, or car holder.
Tip: Have your headset always at hand – clip it to your pocket as you would a pen.
Use the car holder
1
Make sure the surface of the car dashboard is dry and clean.
2
Remove the protective film from the bottom of the car holder.
3
Firmly press the car holder into place.
.
.
5
for 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents