Edit Waypoint Search Area - Acura 2008 TL Navigation System User Manual

Main Menu
System Set-up
NOTE:
• You can select areas to avoid,
however you cannot select roads or
areas that you want the system to use
for routing.
• If you are drawing a box around a
road as an area to avoid, ensure the
following: When you draw the box,
make sure that the road or portion of
a road that you encircled includes an
intersection. For instance, in the
example below, highway 213 will be
avoided, but Van Ness will not be
avoided because it lacks an
intersection in the enclosed box.
94 Navigation System

Edit Waypoint Search Area

When driving on route to your
destination, you can select a temporary
destination "waypoint" (marked with a
small flag on the map) along your route
for gas, a restaurant, or other POI. When
you resume your trip from the
"waypoint," the system continues the
trip to your original destination. To use
this feature, see Waypoints on page 66.
This Setup item allows you to select the
distance from your highlighted route
line (on either side of your route), that
the system will search for a "waypoint."
From the Routing & Guidance screen,
select Edit for "Edit Waypoint Search
Area," and then choose the desired
search distance for either "On
Freeways" or "On Surface Street."
2008 TL
The diagram below shows how the
system handles the search for "Places
Along the Route" or "Places Around the
Destination" (see Waypoints on
page 66).