USeR MANUAL Digital Wireless Video Baby Monitor with Night Light Lullaby Camera www.myLevana.com Model #: BABYVIEW20...
Page 2
USA 14227 Warranty Terms 1. LEVANA products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA’s option.
INTRODUCTION Video Baby Monitor w/ Night Light Lullaby Camera Congratulations! You’ve just taken a step to help ensure your child’s safety and enjoy more of your child’s special moments. Please take a few minutes to read this manual so you can use this monitor to its full potential.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SAFETY INSTRUCTIONS Read and Keep Instructions: All the safety and operating instructions should be read before the video baby monitor is operated. This product cannot replace responsible adult supervision. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times.
• 2 Power Adapters • Lifetime Live Customer Support AVOIDING SIGNAL DISRUPTION Your BABYVIEW20 uses digital transmission to ensure a clear and consistent picture. The signal also passes easily through interior walls. However, buildings with metal frames or placing the camera near large metal objects may cause signal degradation.
KNOWING YOUR BABY MONITOR Monitor: LCD screen Antenna Music selection buttons VOX: Voice Operated Transmission button Power indicator LED Link indicator LED Volume indicator LED Speaker VOX (Voice Operated Transmission) indicator LED Music indicator LED Brightness adjustment buttons Power/Volume control Power adapter jack Battery compartment Belt Clip/Stand Camera:...
CAMERA SETUP CAMERA SETUP You can use the supplied AC adapter or 4 AAA-batteries (not included) to power your camera. Before starting, switch the power to the OFF position. If using batteries: Note: Use new batteries. Do not mix old batteries with new ones. Remove the batteries from the camera if you do not plan to use it for an extended period of time.
CAMERA SETUP If plugging into a wall outlet: 1. Plug one end of the provided power adapter into a wall outlet. (Camera and monitor power adapters are interchangeable.) 2. Connect the other end of the power adapter into the power input on the camera. This is located under the ON/OFF switch.
CAMERA SETUP Using the Night Light • Press the LIGHT button. This will turn ON/OFF the night light stars. The night light will remain on until the button is pressed again. NOTE: We do not recommend using batteries with the night light. The battery life will be less than 2.5 hours with the night light on.
Page 11
MONITOR SETUP If using the included rechargeable battery: Turn the monitor OFF. Rotate the clip on the back of the monitor to an upright position. Slide open the battery compartment cover on the back of the monitor. Insert the battery with its connections matching the connections in the monitor.
Page 12
MONITOR SETUP If using with AC adapter: 1. Plug one end of the provided power adapter into a wall outlet (both camera and monitor power adapters are interchangeable). 2. Connect the other end of the power adapter into the power input on the monitor.
(higher button) to brighten the screen. Sound Activation (VOX) The BABYVIEW20 system lets you turn off the monitor while you are sleeping, and will automatically turn back on if your child starts to cry or make noise. 1. Press the “VOX” button on the left side of the monitor. This will turn off the screen but the “VOX”...
MONITOR SETUP Lullaby Sounds The camera plays a selection of lullabies that you can control with the monitor. With a push of a button you can start playing music, change the song, and stop the music remotely when your baby is asleep. There are 3 different chiming melodies that can sooth your baby to sleep.
RANGE SYNCING CAMERA AND MONITOR The monitor`s range is approximately 100 feet (30 meters); 150 feet (46 meters) in a clear line of sight from the camera. Many factors may increase or decrease the maxi- mum wireless range. The “link” LED will be green when the monitor and camera are paired and red when they are not paired.
TROUBLESHOOTING If you are not getting any signal at all: • Make sure the camera and the monitor are turned on • Make sure the power plugs are pushed all the way in • If the camera/monitor is powered by batteries, replace all batteries with new ones If the signal is poor, or there is interference: • If there is a microwave oven in use in the path between the camera and monitor, turn off the microwave • Make sure the camera and the monitor are within range of each other (optimal range of approximately 100 ft; 150 ft in a clear line of sight) ADDITIONAL INFORMATION • Keep all parts and accessories out of young children’s reach...
LITHIUM BATTERY TIPS The rechargeable battery of the handheld monitor is a built-in lithium- polymer battery. Before using the monitor with battery power, please read the following in order to use the battery properly. Under normal temperatures the battery can be recharged at least 300 times.
Need help?
Do you have a question about the Babyview20 and is the answer not in the manual?
Questions and answers