Drawing Up The Bobbin Thread; Changing Sewing Directions - AEG 11210 Instruction Manual

DRAWING UP THE BOBBIN THREAD

CHANGING SEWING DIRECTIONS

1. Lower needle down into fabric and
raise presser foot, pivot the fabric
around the needle to change direction
as desired.
1. Hold the upper thread with left hand, turn the
hand wheel slowly towards you until the needle
goes down and comes up. Then stop the hand
wheel when the take up lever is at its highest
position.
Lightly draw up the upper thread, by which the
lower thread will be brought up in a loop.
2. Pull out both threads and place them together
under presser foot to the rear of the machine.
3. Place fabric under presser foot from the front,
lower presser foot.
4. Start to sew.
2. Lower the presser foot and start to sew.
- 12 -