Removing The Drop-In Door Trim; Retrait De La Tringle Déposée Dans La Porte - KitchenAid 2199010 Use & Care Manual

Top-mount refrigerator
Table of Contents

Advertisement

Removing the snap-on door
trim (cont.)
To replace the trim:
1. Line up the ends of the trim with
the buttons on the sides of the
door liner.
2. Push the end of the trim straight
back until it snaps into place.
Removing the
drop-in door
trim
To remove the trim:
1. Remove all items from the shelf.
2. Pull straight up on each end of
the trim.
To replace the trim:
1. Locate each end of the trim above
the trim pocket opening.
2. Push the trim ends straight down
until they stop.
20
Retrait de la tringle
enclenchable dans la
porte (suite)
Pour remettre la tringle :
1. Positionner chaque extrémité de
la tringle avec les attaches de
chaque côté de la paroi de la
porte.
2. Pousser la tringle directement au
fond jusqu'à ce qu'elle
Push here
s'enclenche en position.
Pousser ici
Retrait de la
tringle déposée
dans la porte
Pour enlever la tringle :
1. Enlever tous les articles rangés
sur la tablette.
2. Soulever verticalement chaque
extrémité de la tringle.
Pour remettre la tringle :
1. Positionner chaque extrémité de
la tringle au-dessus de l'ouverture
de l'encoche pour la tringle.
2. Appuyer directement sur la tringle
jusqu'à l'arrêt.

Advertisement

Table of Contents
loading

Table of Contents