Settings; Sound (Tones); Display Contrast; Temp Format (Fahrenheit And Celsius) - KitchenAid KDRU707 Use And Care Manual

10. Touch OFF when finished cooking.
Always unplug and remove the temperature probe from the
oven when removing food. The probe symbol will remain lit in
the display until the probe is unplugged.

Settings

Your oven provides you with the ability to control several of the
default settings and access information through the on-screen
display. These include: Sound, Display Contrast, Temp Format,
Calibration, Water Filter, Learn Mode, Sabbath Mode, and
Languages.
To access the Settings menu, see the following sections.

Sound (Tones)

Tones are audible signals, indicating the following:
One beep
Valid key touch
Function has been entered
One chime
Preheat cycle has been completed
Two chimes
End of a cooking cycle
Three beeps
Invalid key touch
Four chimes
When timer reaches zero
Includes using the Timer for functions other than cooking.
Tone Volume (Sound)
The preset volume can be changed. On double ovens, you
can change the sound from either display. Changing the
sound on one display changes the sound for both ovens.
To Change:
1. From the Main menu, touch MORE.
2. Touch SETTINGS.
3. Touch SOUND.
4. To change the sound level, touch the "plus" (+) or "minus" (-)
signs to increase or decrease to the desired level.
5. Touch OK.
NOTE: To turn the sound off, touch "minus" (-) until the bar
disappears to the left.

Display Contrast

To Adjust Display Contrast:
1. From the Main menu, touch MORE.
2. Touch SETTINGS.
3. Touch DISPLAY CONTRAST.
4. Touch + (plus) or - (minus) to increase/decrease the display
contrast to the desired setting.
5. Touch OK.
16

Temp Format (Fahrenheit and Celsius)

The temperature is preset in Fahrenheit; however, it can be
changed to Celsius.
To Change:
1. From the Main menu, touch MORE.
2. Touch SETTINGS.
3. Touch TEMP FORMAT.
4. Touch °F (Fahrenheit) or °C (Celsius).
5. Touch OK.

Calibration (Oven Temperature Control)

IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door during cycling may
give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
ADJUSTMENT °F
(AUTOMATIC °C CHANGE)
10°F (5°C)
20°F (10°C)
30°F (15°C)
0°F (0°C)
-10°F (-5°C)
-20°F (-10°C)
-30°F (-15°C)
To Adjust Oven Temperature Calibration:
1. From the Main menu, touch MORE.
2. Touch SETTINGS.
3. Touch CALIBRATION.
4. Touch the + (plus) or - (minus) to increase or decrease the
temperature.
5. Touch OK.

Water Filter/Filtration System

The Water Filter setting allows you to check the status of the
water filter and reset the system after the filter has been replaced.
IMPORTANT: The oven will shut off the steam functions until the
filter is replaced.
To Check Filter Status:
1. From the main menu, touch MORE.
2. Touch SETTINGS.
3. Touch WATER FILTER.
4. The status will be displayed. There are 3 water filter states:
Good, Replace Filter Soon and Replace Filter. If the filter
status is Replace Filter Soon or Replace Filter, the Reset key
becomes available.
NOTE: See "Water Filter Cartridge Replacement" section.
COOKS FOOD
...a little more
...moderately more
...much more
...default setting
...a little less
...moderately less
...much less