NEC E705 User Manual page 39

Alert error message list
Error number
Alert mail Message
* ErrorCode
The monitor's power supply is not
70h ~ 7Fh
functioning normally.
80h ~ Fh The cooling fan has stopped.
The monitor's back light unit is not
90h ~ 9Fh
functioning normally.
A0h ~ AFh The monitor is overheated.
A2h
The monitor doesn't have the input
B0h ~ BFh
signal.
The system error occurred in the
E0h ~ EFh
monitor.
Sample: The following examples are content of Alert Mail that informs the temperature anomaly of monitor.
Sample: The following examples are content of test mail by browser.
Explanation
Standby power Abnormal
Cooling fan Abnormal
Backlight abnormal
Temperature Abnormal
SENSOR reached at the temperature
that the user had specified.
*condition: DISPLAY PROTECTION-FAN
CONTROL-COOLING FAN = AUTO
No signal
System error.
XXXXXXXXXX
XXXXXXXXXX
English-37
Measure
Please contact your supplier.
Please contact your supplier.
Please contact your supplier.
Please contact your supplier.
Reconfirm the setting condition from
OSD (DISPLAY PROTECTION-FAN
CONTROL) or please contact your
supplier.
Please check "No picture" in
"Troubleshooting".
Please contact your supplier.