Uniden iGO CAM 750 Owner's Manual page 11

Item
Resolution
Quality
Audio
Loop Recording
Digital Zoom
Date/Time display
Motion Detection
Lane Assist
Line Calibration
Click the Menu button again for the following settings to be displayed.
Anti-Flicker
White Balance
Colour
Contrast
Sharpness
EV (Exposure Value)
BL Compensation
(Backlight)
UNIDEN iGO CAM 750
Description
Set the video resolution. The options available are,
1920x1080 30P, 1280x720 60P and 1280X720
30P.
Choose between the options - Super Fine, Fine,
Normal - to defi ne the quality of the recordings.
Opt to turn on or off the audio for the recordings.
Use this option to set the length of each video clip.
If you choose the option 'Off' then the recorder will
not loop record and the fi les will not be overwritten
on the micro SD card.
Turn on this option to zoom in and out of an image.
Choose to display either date or time or both on
the LCD and the recorded fi les.
Enable this setting to allow the recorder to record
only when it detects movement.
This option will alert you when the vehicle is
moving into another lane.
The Lane Assist feature requires correct calibration
to capture road markings. Adjust the sensor lines to
encompass only the area of the display where road
markings can be seen (see page 18 for details).
Change depending on the electrical power
frequency in your area (Default setting is 50Hz and
you may not have to change this setting).
Establish the condition to capture the recordings.
Set the background colour for the recordings.
Adjust the contrast of the image.
Use to defi ne the clarity of detail in the recordings.
Set the brightness sensitivity.
Turn on this feature to reduce the glare on the
recordings due to the background light.
11
Vehicle Recorder