Start; Control Lock; Off; Clock/Timer Display - KitchenAid 9762265 Use And Care Manual

Kitchenaid electric range pro line and architech series use & care guide
Table of Contents

Advertisement

Start

The START pad begins any oven function except the Timer,
Control Lock and Sabbath Mode. If not pressed within 5 seconds
after pressing a pad, “START?” will appear on the oven display as
a reminder. If not pressed within 5 minutes after pressing a pad,
the oven display will return to inactive mode (blank) and the
programmed function will be canceled.

Control Lock

The Control Lock shuts down the control panel pads to prevent
unintended use of the oven. The Control Lock is preset unlocked,
but can be locked.
When the control is locked, only the TIMER SET/START and
TIMER OFF pads will function.
To Lock/Unlock Control: Before locking, make sure the oven,
the Timer and Timed Cooking are off. Press and hold the START
pad for 5 seconds until “CONTROL LOCK” appears on the
display. Repeat to unlock and remove “CONTROL LOCK” from
the display.

Off

The OFF pad stops any oven function except for the Warming
Drawer, Clock, Timer and Control Lock.

Clock/Timer Display

This is a 12-hour clock.
1. Press CLOCK SET/START.
2. Press number pads to set time of day.
3. Press CLOCK SET/START

OPTIONS

Options Selection Pad

The OPTIONS selection pad allows you to access 10 hidden
functions within the Electronic Oven Control. These hidden
functions allow you to change the oven temperature between
Fahrenheit and Celsius, turn the audible signals and prompts on
and off and adjust the oven calibration. The Sabbath Mode is
also set using the OPTIONS selection pad.
To Use: Press OPTIONS. The oven display will scroll through the
various options, starting at 1 and ending in 0. You can also press
the OPTIONS selection pad and number pad to quickly access
the desired hidden function.
OPTIONS
HIDDEN FUNCTION
1
Fahrenheit and Celsius conversion
2
Sound On/Off
3
Sound High/Low
4
End Beep On/Off
6
Oven temperature calibration
7
Sabbath Mode

Fahrenheit and Celsius

Press options, then 1 on the keypad for Celsius. Repeat to
convert back to Fahrenheit.

Tones

Tones are audible signals, indicating the following:
One beep
Function has been entered
Three beeps
Invalid pad press
Timer Completion Tones
Three chimes occur when the timer reaches zero. This can be
when using the timer for functions other than cooking.
Cooking Time Completion Tones
Three beeps indicate the end of a cooking cycle. Press
OPTIONS, and then 4 to turn ON. Press OPTIONS, and then 4 to
turn OFF.
Preheat Completion Tone
One chime indicates a preheat cycle has been completed.
All Tones
All tones are preset ON, but can be turned OFF. To turn tones ON,
press the options key, then press keypad 2. To turn tones OFF,
press the options key again, and then press keypad 2.
Tone Volume
The volume is preset at high, but can be changed to low.
To Change: Press OPTIONS, and then 3 to lower the volume.
Press options 3 to raise the volume of the tones.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door during cycling may
give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a sign means the oven will be warmer by
the displayed amount. Use the following chart as a guide.
ADJUSTMENT °F (AUTOMATIC
COOKS FOOD
°C CHANGE)
10°F (5°C)
...a little more
20°F (10°C)
...moderately more
35°F (15°C)
...much more
-10°F (-5°C)
...a little less
-20°F (-10°C)
...moderately less
-35°F (-15°C)
...much less
To Adjust Oven Temperature Calibration:
1. Press OPTIONS, and then 6 to set the calibration.
2. Press 3 to increase the temperature, or press 6 to decrease
the temperature.
3. Press START to end calibration.
Page 16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents