NEC MultiSync LCD2080UX -BKA Service Manual page 49

OSM Rotation
Resolution Notifier
Factory Preset
Tag8 Video Band Width
(Analog input only)
Sync Threshold
(Analog input only)
SOG Correction
(Analog input only)
Tag9 Display Mode
Monitor Info
To switch OSM between Landscape and Portrait modes. Press "+" or "-" to select.
The optimal resolution is 1600 x 1200. If ON is selected, a message will appear on the
screen after 30 seconds, notifying you that the resolution is not set to 1600 x 1200.
Press "+" or "-" to select.
Selecting Factory Preset allows you to reset all OSM control settings (BRIGHTNESS,
CONTRAST, IMAGE CONTROLS, COLOR CONTROL SYSTEM, SHARPNESS,
EXPANSION MODE, OFF TIMER, OSM POSITION, OSM TURN OFF, DISPLAY
MODE)back to the factory settings. Highlighting the control to be reset and pressing the
RESET button can reset individual settings.
Press "SELECT" to reset.
It is used when the unnecessary noise from computer appears on a screen. It is strong
ineffective, so that a number becomes small. Press "+" or "-" to select.
Adjusts the slice level of a synchronization signal. Press "SELECT" to move the
adjustment menu.
SEP./COMP.: Adjusts the sensitivity of the separate or composite input signals.
Try this option if the FINE adjustment does not successfully eliminate the noise.
Sync On Green: Adjusts the sensitivity of the Sync On Green input signals.
Adjusts the slice level when separating a synchronization from sync On Green signal input.
Press "+" or "-" to select.
Shapes the waveform of the Sync On Green signals. Try this option if the FINE
adjustment does not eliminate the noise produced after the signal cable has been
extended. Press "SELECT" to move adjustment menu.
OFF
The inputted synchronization signal is used as it is.
AUTO
Shapes the waveform according to the input waveform automatically. The signal which
has not deteriorated is used as it is.
ON
Corrects the waveform irrespective of the input waveform.
Provides information about the current display resolution and technical data, including the
preset timing currently being used and the horizontal and vertical frequencies. Increases
or decreases the current resolution. Press "SELECT" to move the adjustment mode, and
press "+" or "-" to adjust.
Indicates the model and serial numbers of your monitor.
English-18
1-46