Input Signal; Program; Operation; Edid Data Inspection And Writing To The Dvi Connector (Input 1) Analog - NEC MultiSync LCD2080UX -BKA Service Manual

3.2 Input Signal

Horizontal synchronization frequency
Vertical synchronization frequency

3.3 Program

Service tool Ver. 3.17 (Parameter ver. 1.0-S1) (Part No. 599910630)

3.4 Operation

3.4.1 EDID Data Inspection and Writing to the DVI Connector (Input 1) Analog

1) Connect the EDID data writing unit with jigs, etc. (Refer to a DVI-A connector connection figure)
2) Copy all the files of the service tool Ver. 3.17 (Parameter ver. 1.0-S1) in a proper directory.
3) Start [Service2.EXE] of the service tool Ver. 3.17.
4) When the screen as shown below appears, give a check to [LCD] of [Monitor Type] and press the
[START] button.
: Not specified.
: Not specified.
5-24