Quick Start Section - Canon PowerShot S230 DIGITAL ELPH Connection Manual

12

Quick Start Section

Charge Indicator
Battery Lock
Lock for the CF Card
Power Lamp
Slot Cover
Charge the Battery Pack (p. 18).
1
Place the battery pack in the battery
charger and plug the charger into a
outlet. The charge indicator lights
power
red while charging and changes to green
when the battery pack is charged.
Install the Battery Pack (p. 20).
2
Slide the battery cover open and press the
battery lock while you insert the battery
pack. Insert the battery pack correctly by
aligning the arrows on the camera and
battery pack.
3
Install the CF Card (p. 22).
Slide the lock on the CF card cover to
open it and insert the CF card.
Set the Mode Switch to
4
(Shooting) (p. 42).
5
Turn on the Power (p. 26).
Press the ON/OFF Button until the power
lamp in the center of the 4
buttons lights.
/ / /