Canon PowerShot S230 DIGITAL ELPH Connection Manual page 134

86
Shooting
1.
Attach the supplied USB cable to the computer's USB port and the
camera's Digital Terminal. Prepare the camera for communication with the
computer.
• For USB cable connection instructions, see Connecting the Camera to a
Computer (p. 66).
• PowerShot S45: open the lens cover after connecting.
• PowerShot G3: remove the lens cap after connecting.
• PowerShot S230 DIGITAL ELPH/DIGITAL IXUS v
mode and then turn on the power.
• ImageBrowser will start and open the ImageBrowser Automation wizard.
2.
Click the [Settings Change] button.
3.
Select [Launch RemoteCapture] and click the [OK] button.
• RemoteCapture will start and display the "Connect to Camera?" dialog.
• If ImageBrowser is already running, click the [Edit] menu and select
[RemoteCapture] to start RemoteCapture.
4.
Click [Connect].
• Shooting-RemoteCapture window will display.
5.
Set the Size/Quality and Rotate settings.
• If you turn the camera on either side to shoot, you can rotate the recorded
image 90º either way when it is saved by selecting [90 degree left] or [90
degree right] in the [Rotation] settings section. However, when the camera's
[Auto Rotate] is set to [On], the Rotation setting is not available. To change
where the image is saved, see Changing the Save Location and Other
Preferences (p. 88).
6.
Click [Detail setting].
• The full-view Shooting-Remote Capture window appears.
7.
If you click the [Viewfinder On], you can check the image composition in the
upper portion of the Shooting-RemoteCapture window.
• Change the settings if required. To update any changes made in the Detail
Settings window, click the [Reflect changes] button.
8.
Click the [Release] button.
• The image will record and be automatically saved to the computer. You can also
release the shutter by pressing the camera's shutter button directly or by
pressing the space bar on the computer keyboard.
3 : set the mode switch to Replay