Check The Following First; Connect The Lan Cable - Canon ImageClass MF8580 Cdw Getting Started

Table of Contents

Advertisement

1
Wired LAN Connection

Check the following first.

Are the computer and the router properly
connected using a LAN cable?
For details, see the instruction manual provided with your
network device, or contact the manufacturer.
Has the network settings on the computer been
complete?
If the computer is not properly configured, you may not
use the wired LAN connection even after completing the
following settings.
NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time.
• When you connect to a network environment that
is not security protected, your personal information
could be disclosed to third parties. Please use
caution.
2
Wired LAN Connection

Connect the LAN cable.

The machine does not come with a LAN cable or router. Have LAN Cable of Category 5 twisted pair cable or higher
ready.
Wait for approximately 2 minutes.
The IP address will be automatically configured.*
1
2
Preface
Installing the Machine
Downloaded from ManualsPrinter.com Manuals
If the IP address on this machine has been changed:
Router
If the machine is on the same subnet as the computer, the
connection is maintained.
* If you want to manually configure the IP address:
If you have set a static IP address to the IP address of the
computer, manually configure a static IP Address.
LAN Cable
"Setting IPv4 Address" in the e-Manual
"Setting IPv6 Address" in the e-Manual
3
Connecting to a Computer and Installing the Drivers
Internet
• If you connect through a LAN in the office, contact
your network administrator.
4
Configuring and Connecting the Fax
Connecting to the Computer
Router
LAN Cable
15

Advertisement

Table of Contents
loading

Table of Contents