Enabling The Display Settings For A Tv In Microsoft® Windows® Xp - Dell Precision M70 User Manual

2. Click the Properties icon.
3. Click the Dolby Headphone tab.
4. Click Enable Dolby Headphone.
NOTE: Icon labels may be visible only when you place the cursor over the icon.
5. Select one of the four options to set the level of surround sound effects. Option 1 is a baseline stereo option and Options 2, 3, and 4 are surround
sound levels.
6. Click Apply, and then click OK to close the WinDVD Properties window.
7. Click Exit.
Enabling the Display Settings for a TV in Microsoft® Windows® XP
Your computer may have either an ATI video-controller card or an NVIDIA video-controller card. See the following subsection that corresponds to the video
controller installed in your computer.
ATI Video-Controller Card
NOTE: Ensure that you properly connect the TV before you enable the display settings.
1. Click the Start button and click Control Panel.
2. Click Appearances and Themes.
3. Under or pick a Control Panel icon, click Display.
4. Click the Settings tab and click Advanced.
5. Click the Displays tab.
6. Click the upper-left corner of the TV button to enable the TV.
7. Click OK.
NVIDIA Video-Controller Card
NOTE: Ensure that you properly connect the TV before you enable the display settings.
1. Click the Start button and click Control Panel.
2. Click Appearances and Themes.
3. Under or pick a Control Panel icon, click Display.
4. Click the Settings tab and click Advanced.
5. Click the Nvidia GeForce tab.
6. On the left side of the menu, click nView Display Mode.
7. Click Clone to enable the television.
8. Click Apply.
9. Click OK to confirm the settings change.
10. Click Yes to keep the new settings.