Samsung 6000 Series User Manual page 12

- Connecting to an Audio Device
Using an Optical (Digital) or an Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD Home Theater
Opttear Cable {Not Supplied)
~
DIGITAL AUDIO OUT (OPTICAL)
Red White
o
When you connect a Digital Audio System to the
DIGITAL AUDIO OUT (OPTICAL)
jack, decrease the volume
of both the TV and the system.
o
5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.
o
When the receiver (Home Theater) is set to on, you can hear sound output from the TV's optical jack. When
the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the Home Theater receiver. When the
source is a digital component such as a DVD player I Blu-ray player I cable box I STB (Set-Top -Box) satellite
receiver and and you connected it to the TV via HDMI, you will only hear 2 CH audio from the Home Theater
receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD
I
Blu-ray player
I
cable box
I
STB satellite receiver directly to an amplifier or Home Theater.
~
AUDIO OUT:
Connects to the audio input jacks on your amplifieri DVD Home Theater.
o
When connecting , use the appropriate connector.
o
When you connect an audio amplifier to the
AUDIO OUT
jacks, decrease the volume of the TV and adjust the
volume level with the amplifier's volume control.
Connecting to a PC
Using an HDMI cable or an HDMI to DVI cable or a D-sub cable
~
Your PC may not support an HDMI connection.
HOM I Cable I Not Supplied )