Download  Print this page

Clutch Cable Installation; Clutch Cable Inspection And Lubrication - Kawasaki KX250F Service Manual

Hide thumbs


Clutch Lever and Cable
Free the cable from the cable holder [A].
Free the clutch inner cable tip [B] from the clutch release
lever [C].
Do not remove the clutch release shaft unless it is
absolutely necessary. If removed, release shaft oil
seal must be replaced with a new one.
Pull the clutch cable out of the frame.

Clutch Cable Installation

Run the clutch cable correctly (see Appendix chapter).
Adjust the clutch cable (see Clutch Lever Free Play Ad-
justment in Periodic Maintenance chapter).

Clutch Cable Inspection and Lubrication

During a periodic inspection or when the cable has been
removed, inspect and lubricate the cable (see General
Lubrication in the Periodic Maintenance chapter).


Table of Contents

   Also See for Kawasaki KX250F

This manual is also suitable for:

Kx250f 2004

Comments to this Manuals

Symbols: 0
Latest comments:
  • Paul Aug 31, 2015 08:09:
    Does the manual say when to rebuild their 4 stroke bikes
  • Paul Aug 31, 2015 08:24:
    Does the manual say when to rebuild the 250 four stroke bikes