Test Operation - LG WD-10120FD Service Manual

TEST OPERATION

Preparation for
washing.
Connect the power plug to
the outlet.
Connect the inlet hose.
Check the water heating.
Press the Temp. button
and the present temperature will
be displayed.
Check drain and spin
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
Press the power button.
Check automatic reverse
turn.
Check if the drum rotates
clockwise and counterclockwise.
Power off and open the
door
Power off and then power on.
Check if the door can be
opened after 3 minutes.
9
Press the Start/Pause
button.
In case of coloureds program.
Check the water supply.
Check if water is supplied
through the detergent dispenser.
Water removal
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.