Table of Contents
Advertisement
Quick Links
Super Wide-i
SeaCam
Operator's Manual
4033 Ruffin Road
San Diego, CA
T:
(858) 576-1261
92123- 1817 USA
F:
(858) 576-0219
®
Super Wide-i SeaCam
Record product serial number below as it appears on the nameplate.
Serial #
Connector Type
Pin-outs:
● Ground = Pin ____
● PWR = Pin ____
● Video = Pin ____
www.deepsea.com
sales@deepsea.com
®
Original Instruction - 1
REV 3/5/14
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DeepSea Power & Light Super Wide-i SeaCam
Summary of Contents for DeepSea Power & Light Super Wide-i SeaCam
- Page 1 Super Wide-i SeaCam ® Operator’s Manual ® Super Wide-i SeaCam Record product serial number below as it appears on the nameplate. Serial # Connector Type Pin-outs: ● Ground = Pin ____ ● PWR = Pin ____ ● Video = Pin ____ 4033 Ruffin Road www.deepsea.com...
-
Page 2: Specification Overview
Operator’s Manual Super Wide-i SeaCam ® Specification Overview Standard Connector Mechanical Specifications MCBH4MP Housing 6013-T8 Hard Anodized Aluminum (Standard) 6Al-4V Titanium (Optional) 1 = Ground Port Optically polished glass hemisphere 2 = Power 3 = Video Out Outer Diameter 58.4 mm (2.30 in) -
Page 3: Table Of Contents
Operator’s Manual Super Wide-i SeaCam ® Table of Contents Specification Overview Table of Contents Safety Symbols General Notes and Warnings Pre and Post Dive Inspection Operation Procedure Operation Instruction Camera Output Flooding Repair Procedure Troubleshooting RMA Procedure for Repair Warranty Information... - Page 4 Pre and Post Dive Inspection connectors, camera modules and depth ratings. Be sure to verify pin-out orientation before use. Rinse your Super Wide-i SeaCam in fresh water after It is very important when preparing the system for use in saltwater.
-
Page 5: Troubleshooting
If Camera Output it is loose, check for damage on the board. The Super Wide-i SeaCam is capable of producing an If there appears to be no damage, reattach incredible wide field of view both in and out of water. -
Page 6: Warranty Information
Operator’s Manual Super Wide-i SeaCam ® accepted) and that the RMA number is clearly printed on agent, employee, or representative is specifically included the outside of the box. All shipments should be sent to the within this contract, it will not be enforceable by Buyer.
Need help?
Do you have a question about the Super Wide-i SeaCam and is the answer not in the manual?
Questions and answers