Download Print this page

Electrical Requirements - KitchenAid 4452828 Installation Instructions Manual

27" and 30" electric warming oven
Hide thumbs


Electrical Shock Hazard
Plug into a grounded 3-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
Important: Observe all governing
codes and ordinances.
It is the customer's responsibility:
To contact a qualified electrical
To assure that the electrical
installation is adequate and in
conformance with National Electrical
Code, ANSI/NFPA 70 — latest edition*,
and all local codes and ordinances.
You must have:
120-volt, 60Hz, AC-only, 15- or 20-
amp., fused electrical supply.
outlet located in the cabinet as close
as possible to the warming oven.
We recommend:
a time-delay fuse or circuit breaker.
a separate circuit serving this
appliance only.
If codes permit and a separate ground
wire is used, it is recommended that a
qualified electrician determine that the
ground path is adequate.
ground plug
power supply
ground prong
Figure 1
For your personal safety, this appliance
must be grounded. This appliance is
equipped with a power supply cord
having 3-prong ground plug. To minimize
possible shock hazard, the cord must be
plugged into a mating 3-prong ground-
type outlet, grounded in accordance with
local codes and ordinances. See
Figure 1. If a mating outlet is not
available, it is the personal responsibility
and obligation of the customer to have a
properly grounded 3-prong outlet installed
by a qualified electrician.
Warning — Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or serviceman
if you are in doubt as to whether the
appliance is properly grounded. Do not
modify the plug provided with the
appliance - if it will not fit the outlet, have
a proper outlet installed by a qualified